Korg Forums

[mtps]

For those who they want they upgrade a trinity-rack it should you make cable AG-001 and you connect in the trinity-rack "TO HOST" port.

Here is the last Operating System v1.04. http://www.korguksupport.co.uk/Page.cfm?PageId=403

This cable won't work with Macs because they have a different serial port (see below).

You need two connectors: a Mini DIN 8-pin and a D-SUB 9-pin. Connect them to each other as shown in the following picture.



So you connect pins 3-2, 4-5 and 5-3, and short circuit pins 7 and 8.

The pin order of the connectors (as seen from the outside) is as follows. Note: the order shown below really is correct, although it may seem illogical!




Of course if you don't know what you're doing you should ask a knowledgeable friend to build the cable for you.
_________________
Gear: M50-61, MOTIF XS6, Microkorg, Microkorg XL
Youtube Listen my music! mtps-studio.com

[Diego]

THanks a lot for these very useful infos!
_________________
Diego http://www.myspace.com/diegoinmusic

Korg M3 with EXB Radias & EXB-256 onboard
MOTU Traveler - iBook G4

[RackMan]

What are the fixes in this update - I'm still on 1.0.1 - I ain't had no issues etc but uknow if I'm missing out on something, I should be TOLD!! lol