View previous topic :: View next topic |
Author |
Message |
IvanL33
Joined: 23 May 2007 Posts: 6 Location: Manila, Philippines
|
Posted: Wed Jan 16, 2008 3:50 pm Post subject: X50 Brass pls help |
|
|
Hi guys! im having a hard time to program brass patches on X50, can somebody pls help me on these? this is my first KORG synthesizer, i used to have a Roland RS5 of which i used to love, especially the brass patches.
thanks in advance! |
|
Back to top |
|
|
xmlguy Platinum Member
Joined: 26 Nov 2007 Posts: 3605
|
Posted: Wed Jan 16, 2008 5:14 pm Post subject: |
|
|
Are you using the X50 Editor Software? |
|
Back to top |
|
|
IvanL33
Joined: 23 May 2007 Posts: 6 Location: Manila, Philippines
|
Posted: Thu Jan 17, 2008 4:35 pm Post subject: |
|
|
Yes, im using the software and i find it so easy to edit using the editor. my problem is that im not familiar with the parameters, it's too complex for me that's why im not able to program the brass patch i wanted to make. |
|
Back to top |
|
|
xmlguy Platinum Member
Joined: 26 Nov 2007 Posts: 3605
|
Posted: Fri Jan 18, 2008 4:12 am Post subject: |
|
|
Look for program patches to load from the Tritons. There are thousands of them. Then you can use the editor software to load them into the X-50.
To make your own brass patch, there are two main factors that distinguish them. They have a relatively slow attack, with a volume that increases to the sustain level. The sound brightens in a second or two. You do that with an Amp envelope and a Filter Envelope. Adding some vibrato with a slow attack also helps. |
|
Back to top |
|
|
IvanL33
Joined: 23 May 2007 Posts: 6 Location: Manila, Philippines
|
Posted: Fri Jan 18, 2008 2:21 pm Post subject: |
|
|
Thanks xmlguy! I'll try what you have suggested! |
|
Back to top |
|
|
|