Please help me.

A place for those who are part of the "One song a month – one year contract" to discuss issues and share ideas. Started on the 1st of March 2005.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever, georgeinar

User avatar
JonSolo
Platinum Member
Posts: 969
Joined: Sun Aug 14, 2005 1:23 pm
Location: Charleston
Contact:

Post by JonSolo »

Just go to the link I posted above and download the ones in English. They should install with no problem. The Edirol should work just fine for your soft synths in Sonar. If you are using Sonar make sure you use the ASIO drivers instead of the WDM, Windows, or Realtek drivers. I did see Sonar 6 Studio on Amazon for $69 the other day.

Your computer is fast enough to run just about any audio program out there. Of course the Edirol MIDI front end may come with some software.

Jon
Jon Solo

http://www.solosounds.net
http://jonsolo.me
http://www.soundcloud.com/jonsolo
http://www.twitter.com/thejonsolo

Windows 10 | Intel i9 9900K | 64 GB RAM | Scarlett 18i20 | Nektar Panorama P6
Korg Kronos - 88 | Korg Kronos 2 - 61 | Roland Fantom 6 | Push 2 | Maschine Mk2 | Slate ML1 | JBL LSR308/310
Nuendo 11 | Ableton Live 11 | Reason 12 | FL Studio 20.9
User avatar
ellll
Platinum Member
Posts: 3118
Joined: Thu Dec 09, 2004 4:00 pm
Location: Panama City, FL

Post by ellll »

Hi Friends,

My wife's surgery went fine...and she sleeps..!!! (for a change..much pain already gone) ..Gall Bladders can be a real pain, tho' usually not real dangerous...

Thanks for you thoughts!!! John (ellll) :D
Daz
Retired
Posts: 10829
Joined: Tue Jan 01, 2002 7:35 pm
Contact:

Post by Daz »

Glad to hear it, John !
User avatar
JonSolo
Platinum Member
Posts: 969
Joined: Sun Aug 14, 2005 1:23 pm
Location: Charleston
Contact:

Post by JonSolo »

My mother went through that a few years back. It can be rough, but I am glad to hear everything went ok. Please give her our thoughts!

Jon
Jon Solo

http://www.solosounds.net
http://jonsolo.me
http://www.soundcloud.com/jonsolo
http://www.twitter.com/thejonsolo

Windows 10 | Intel i9 9900K | 64 GB RAM | Scarlett 18i20 | Nektar Panorama P6
Korg Kronos - 88 | Korg Kronos 2 - 61 | Roland Fantom 6 | Push 2 | Maschine Mk2 | Slate ML1 | JBL LSR308/310
Nuendo 11 | Ableton Live 11 | Reason 12 | FL Studio 20.9
User avatar
ellll
Platinum Member
Posts: 3118
Joined: Thu Dec 09, 2004 4:00 pm
Location: Panama City, FL

Post by ellll »

My Thanks friends...Your thoughts are always a help...!!!

Regards..ellll... John :D
User avatar
JonSolo
Platinum Member
Posts: 969
Joined: Sun Aug 14, 2005 1:23 pm
Location: Charleston
Contact:

Post by JonSolo »

OSAM April thread?

Pushy aren't I?

ha ha

Jon
Jon Solo

http://www.solosounds.net
http://jonsolo.me
http://www.soundcloud.com/jonsolo
http://www.twitter.com/thejonsolo

Windows 10 | Intel i9 9900K | 64 GB RAM | Scarlett 18i20 | Nektar Panorama P6
Korg Kronos - 88 | Korg Kronos 2 - 61 | Roland Fantom 6 | Push 2 | Maschine Mk2 | Slate ML1 | JBL LSR308/310
Nuendo 11 | Ableton Live 11 | Reason 12 | FL Studio 20.9
User avatar
ellll
Platinum Member
Posts: 3118
Joined: Thu Dec 09, 2004 4:00 pm
Location: Panama City, FL

Post by ellll »

Go for it soon..

fine in my op...

John :D
User avatar
ellll
Platinum Member
Posts: 3118
Joined: Thu Dec 09, 2004 4:00 pm
Location: Panama City, FL

Post by ellll »

I have,

One thing that KILLS me every so often....and it is the ONE thing on Firefox I wonder about ..(as a computer illiterate)..

Ever few weeks or months it says..."Firefox must shut down...sorr. for inconven. .. etc...and it seems something has been trying to come in like pop ups, or other adds..(yahoo rt. side adds...example), whan it happens....so...

Could it be the firewalls and/or the auto AVG or something? I have to COMPLETELY stop, and wait till its through...????? or shut it down and start from scratch..

Regards, John (ellll) :shock:
User avatar
JonSolo
Platinum Member
Posts: 969
Joined: Sun Aug 14, 2005 1:23 pm
Location: Charleston
Contact:

Post by JonSolo »

That happens many times ellll when Firefox updates it's own programs or installs pluggins that help it run better. Since you are using Firefox, I would not be overly concerned if you installed it and ran using the default settings.

Firefox is pretty secure, and odds are that you really don't have a lot of personally damaging information stored on your computer.

Jon
Jon Solo

http://www.solosounds.net
http://jonsolo.me
http://www.soundcloud.com/jonsolo
http://www.twitter.com/thejonsolo

Windows 10 | Intel i9 9900K | 64 GB RAM | Scarlett 18i20 | Nektar Panorama P6
Korg Kronos - 88 | Korg Kronos 2 - 61 | Roland Fantom 6 | Push 2 | Maschine Mk2 | Slate ML1 | JBL LSR308/310
Nuendo 11 | Ableton Live 11 | Reason 12 | FL Studio 20.9
User avatar
ellll
Platinum Member
Posts: 3118
Joined: Thu Dec 09, 2004 4:00 pm
Location: Panama City, FL

Post by ellll »

Thanks Jon,

I felt really secure...but it can hit you at a bad time...But if you use the restore program, it goes back to where you were quite well..

I have new firewalls, and autoad programs the local man put in when he put in my memory...But I am going to add memoty again I think...I am about ready to try a bit of Comp based senq... maybe...

Chack my PM...

My Regards, John
User avatar
JonSolo
Platinum Member
Posts: 969
Joined: Sun Aug 14, 2005 1:23 pm
Location: Charleston
Contact:

Post by JonSolo »

One thing I noticed about Firefox is that some sites that have particular scripting can cause Firefox to shut down. It usually comes from some ad at the top of the page. Again, it is not something worth worrying about. As Firefox is gradually being adapted as the net standard (right now it makes up 48% of all browsers that view my site, not including my own ip as I have filtered that out so as to not "mess" with my stats) I expect to see fewer problems associated with it.

Jon
Jon Solo

http://www.solosounds.net
http://jonsolo.me
http://www.soundcloud.com/jonsolo
http://www.twitter.com/thejonsolo

Windows 10 | Intel i9 9900K | 64 GB RAM | Scarlett 18i20 | Nektar Panorama P6
Korg Kronos - 88 | Korg Kronos 2 - 61 | Roland Fantom 6 | Push 2 | Maschine Mk2 | Slate ML1 | JBL LSR308/310
Nuendo 11 | Ableton Live 11 | Reason 12 | FL Studio 20.9
Stephen
Platinum Member
Posts: 4709
Joined: Wed Aug 28, 2002 11:07 am

Post by Stephen »

ellll wrote:Hi Friends,

My wife's surgery went fine...and she sleeps..!!! (for a change..much pain already gone) ..Gall Bladders can be a real pain, tho' usually not real dangerous...

Thanks for you thoughts!!! John (ellll) :D
My wife just had hers removed, after a horrible Hoilday season, due to the Doctor thinking she "Just had the Flu".
Glad Mrs. Ellll is doing well
:)
User avatar
Dee
Platinum Member
Posts: 532
Joined: Thu Jul 10, 2003 4:34 am
Location: Sydney, Australia

Post by Dee »

Good to hear your wife is feeling better, John!
-----------------------------------------------------
And to all my good OSAM friends, here is my latest news...

I have decided to 'go the whole hog' and start fresh with an mbox2 and protools. I did consult with Jon first, and we compared prices for various bits and pieces....the mbox option was going at a very special price, so I've gone and done it and am now trying to install everything.

Do you think I'm crazy..... :shock:

Regards from
Dee :D
User avatar
ellll
Platinum Member
Posts: 3118
Joined: Thu Dec 09, 2004 4:00 pm
Location: Panama City, FL

Post by ellll »

Well...,

Ir's beginning to show results...??? so maybe you were more able to do it than you thought to begin with....???

It's gonna pay off...

Johnny,---(ellll) :D
User avatar
georgeinar
Platinum Member
Posts: 3425
Joined: Sat Jun 15, 2002 5:15 pm
Location: Chicago
Contact:

Post by georgeinar »

OK, now I have a question. I'm ready to attempt vocals to sing along with my m3 sequence. I would like to try using the audio tracks on my ts. Jonsolo said to make the TS the master and m3 the slave, and I have set the clock on the m3 from internal to sp dif and I have an optical connected from the spdif out on the TS to the in on the m3 and the m3 does let me set the clock to spdif rather than internal. Now how do I make it so my sequence #20 on the m3 will start when I press record/play on the ts so I can start wailing away on my vocals. For some reason I thought the m3 would automatically go into a wait/standby mode until i hit start or record on the ts, but that's now what it does, in fact i can play or pause on the m3 independently of watever the ts is doing. I have also hooked up midi cables ts-out to m3-in, but i'm not sure i need those.

Does the m3 have to be the slave here is also my question. Or can it tell the TS to begin recording when I hit play on the sequence key on the m3? HELP !!!
:3dread:
George Nelson is 2loose
http://www.cdbaby.com/artist/2loose for my cds
http://www.soundclick.com/2loose or follow my tweets = 2loose_buzzgoth (twitter name)
<a href="http://cdbaby.com/cd/2loose2"><img src="http://cdbaby.name/2/l/2loose2_tiny.jpg" width="50" height="50" alt="album cover" border="0"></a>
Post Reply

Return to “One song a month – One year Contract”