Korg Forums

Maarty · Joined: 04 Oct 2010 Posts: 15

Hi,
I have sound monster lead.. Joystick -Y makes a modulation of sound... and everytime when I load sound , the parameters of modulation are on maximum (just like when I pull the joystick down) until I move joystick...

How can I change it? When I load sound I want to have it default with no modulation (only if I move JS-Y)

Thank you
_________________
Korg Triton Extreme 61
Yamaha DGX 220 76

Rosen Sound · Posted: Sun Jan 16, 2011 6:29 am Post subject:

check if the SW buttons have JS lock on them
_________________

Current gear: Korg Kronos 61, Oberheim OB-8, Alesis Vortex
Past Gear: Triton Extreme w/moss & ram, Korg Radias, Kurzweil Micropiano, Triton classic, & Karma
Come visit my Burbank California repair shop/recording studio! Rosensound.com
And my band: Sirion.us.com

Maarty · Joined: 04 Oct 2010 Posts: 15

Yes SW2 locks it.. but It is not locked.. Everytime when I load sound, it sounds with max modulation, until I move joystick.. then it behaves normal.. I can figure out how to deal with it
_________________
Korg Triton Extreme 61
Yamaha DGX 220 76

Rosen Sound · Posted: Mon Jan 24, 2011 2:22 am Post subject:

i will get to the bottom of this 0.0
_________________

Current gear: Korg Kronos 61, Oberheim OB-8, Alesis Vortex
Past Gear: Triton Extreme w/moss & ram, Korg Radias, Kurzweil Micropiano, Triton classic, & Karma
Come visit my Burbank California repair shop/recording studio! Rosensound.com
And my band: Sirion.us.com

Rosen Sound · Posted: Mon Jan 24, 2011 3:07 am Post subject:

okay from what i can see, you need to leave wah OFF but set the SRC to JS-y or whatever its st o, then do the sme for the SRC below it for the wah sweep

tell me if that works
_________________

Current gear: Korg Kronos 61, Oberheim OB-8, Alesis Vortex
Past Gear: Triton Extreme w/moss & ram, Korg Radias, Kurzweil Micropiano, Triton classic, & Karma
Come visit my Burbank California repair shop/recording studio! Rosensound.com
And my band: Sirion.us.com

billbaker · Posted: Mon Jan 24, 2011 1:59 pm Post subject:

With some continuous controllers, esp. knobs, you get a value until you move the controller past a certain threshold, as if you had to swing by and hook onto the pre-set handle established for that parameter.

Try wah ON but at 0/dry rather than a positive value, and JS+ = 100 ... then joy stick modulations should only START when you move the stick, and not normalize after reading that the stick is at zero after moving.

Also look to see if the JS is in charge of several things at once, i.e., if the wah on/off is set to joystick as a latch or momentary switch AND the filter (wah) too -- it could just be a case of poor controller delegation.

BB
_________________
billbaker

Triton Extreme 88, Triton Classic Pro, Trinity V3 Pro
+E-mu, Alesis, Korg, Kawai, Yamaha, Line-6, TC Elecronics, Behringer, Lexicon...

Rosen Sound · Posted: Tue Jan 25, 2011 2:35 am Post subject:

Yeah after i posted i realized that what your saying is correct

listen to that guy!
_________________

Current gear: Korg Kronos 61, Oberheim OB-8, Alesis Vortex
Past Gear: Triton Extreme w/moss & ram, Korg Radias, Kurzweil Micropiano, Triton classic, & Karma
Come visit my Burbank California repair shop/recording studio! Rosensound.com
And my band: Sirion.us.com