View previous topic :: View next topic |
Author |
Message |
simondrake Full Member
Joined: 26 Jan 2011 Posts: 116
|
Posted: Tue Feb 15, 2011 9:24 pm Post subject: assignable switch |
|
|
I have a trouble with my pa2x:
when playing styles if I push one of the assignable swith, I think the 2, it slows the tempo of the style. What is that for? can I change that? I was trying to use the DNC sounds to have the sound variations, but what happens doesn't relate to the sound, but acts on the style tempo. Is there something that I miss?
thanks, Simone |
|
Back to top |
|
|
neverkorgagain Senior Member
Joined: 20 Dec 2009 Posts: 347 Location: Serbia (Srbija)
|
Posted: Tue Feb 15, 2011 10:34 pm Post subject: |
|
|
go to GLOBAL and u will find it... i cant remember now where exactly in GLOBAL, my keyboard is not present here, but ill tell u tommorow if some1 dont do it be4 me. |
|
Back to top |
|
|
Sam CA Platinum Member
Joined: 02 May 2008 Posts: 3990 Location: Los Angeles
|
Posted: Tue Feb 15, 2011 10:56 pm Post subject: |
|
|
If you hold down shift and press any of the switches, you'll see the list of all assignable options. _________________ Sam
|
|
Back to top |
|
|
simondrake Full Member
Joined: 26 Jan 2011 Posts: 116
|
Posted: Wed Feb 16, 2011 10:21 pm Post subject: |
|
|
Ok, thanks, I got to the list.
I am still a little confused because looking at some tutorial on youtube showing the DNC features of the sounds with the OS 2 of the PA800-2x they show that the assignable switches can modify the sounds in real time performances, How do you get it? do you have to program the switches beforehand or it works straight after selecting the sound?
one more general question that sounds as a small investigation: can you tell me which functions you programmed the switches with? I am curious because even though I found the various possibilities I don't know what to do with it.
I would like to have practical suggestions.
thanks, Simone |
|
Back to top |
|
|
MrVlad Full Member
Joined: 26 Feb 2006 Posts: 130 Location: Derby, England Korg PA800
|
Posted: Thu Feb 17, 2011 10:04 am Post subject: |
|
|
if you mean how to control the DNC sounds then you need to assign the switches to the DNC controller.
- In style Play, press menu, then PAD.assign Switch
- select the Switch tab at the bottom
- For Switch 1 assign SOUND CONTROLLER 1
- For Switch 2 assign SOUND CONTROLLER 2
exit, and make sure you save global settings (also lock them if you need to)
hope this helps
regards
MrVlad _________________ Korg PA800 |
|
Back to top |
|
|
LESSISMORE Platinum Member
Joined: 15 Jul 2009 Posts: 531 Location: Germany
|
Posted: Thu Feb 17, 2011 1:21 pm Post subject: |
|
|
Hello Simone
you have to install OS 2.01 and resources 2.01.
In the Sound-Editor you can change the Controller 1 + 2 functios for each sound. _________________ Best regards from germany
LiM
The Good The Bad And The Ugly |
|
Back to top |
|
|
|