Korg Forums

[roboo]

for example i choose pattern 2 (is 16 bars length and is empty) after i choose load a pattern 2 in pattern 3 (in the correct bank), and then i play pattern 3 and.... surprise!!! sometimes load other different pattern and sometimes load pattern 2 but only 4 bars!!!!.......... please HELP!!!! i show all in pattern and in sample and in global and......i think is all ok?

[Telengard]

Are you using the microSAMPLER software on your PC/MAC or are you trying to move patterns from the microSAMPLER itself? Not sure I understand what you are trying to do.
_________________
Korg Gear: Electribe 2, microSAMPLER, Mini Kaoss Pad 2, monotron, nanoKey, nanoKontrol2, nanoPad2
Korg Apps: iMS-20, iElectribe, iKaossilator
Old Korg Gear: Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS

[roboo]

[roboo]

[Telengard]

I will try it on mine today and see if I get the same results.

-UPDATE:

I can do it on mine without a problem. Examples:

1) I take empty pattern 10 on bank F (It has a length of 4). Load pattern 1 from Bank G (It has a length of 16). Loads fine and shows the proper length of 16. But I don't have the samples loaded from bank G so I don't hear anything or it will play the samples on the keys assigned to bank F. So I load the samples from bank G to bank F and all is good.

2) I take empty pattern 10 on bank G (Length 4). Load pattern 1 from bank G (Same bank. Length 16). Loads fine and plays as expected.

Are you sure the samples are loaded into the bank that goes with the pattern?

Hope that helps you figure out what is going on.
_________________
Korg Gear: Electribe 2, microSAMPLER, Mini Kaoss Pad 2, monotron, nanoKey, nanoKontrol2, nanoPad2
Korg Apps: iMS-20, iElectribe, iKaossilator
Old Korg Gear: Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS

[roboo]