Korg Forums

[poloop]

Hi, When i switch on the pa900 i need always reactivate the clock send on global/midi mode, he's never saved in the parameters options, it's a bug?

[MamieNova]

Hi Poloop,

Normal behaviour, as stated in the manual.
_________________
Korg PA600, Yamaha MOXF8, Korg nanoKontrol2
Free set with 1200 styles for PA300 to PA4X with Korg resources and a bit more: Look for Dopamine set 2.6 and PaStitch

[poloop]

Hi MamieNova, the manual don't say you need to reactivate clock send always the pa900 switch off/on, for the workflow it's not very good

[MamieNova]

I fully agree that it's not the best "feature" of the PA.

PA600 manual p149 (probably also present in the PA900 manual, not checked):

Clock Send
Use this parameter to turn the clock information on the MIDI OUT or USB Device port on or off.
Note: This parameter is automatically deactivated each time you turn the instrument on.
Off: The Pa600 does not send the MIDI Clock signal. You cannot slave another instrument to the Pa600, even when connected to the MIDI OUT or USB Device port.
On: The Pa600 sends the MIDI Clock signal. You can slave another instrument to the Pa600 Tempo, Start/Stop and Play/Stop commands. Connect the other instrument to the Pa600 MIDI OUT or USB Device port.
_________________
Korg PA600, Yamaha MOXF8, Korg nanoKontrol2
Free set with 1200 styles for PA300 to PA4X with Korg resources and a bit more: Look for Dopamine set 2.6 and PaStitch

[poloop]

Thanks for your answer MamieNova, not possible to save this basic parameter it's a joke! i think korg can fix it simply with an update but Nothing