View previous topic :: View next topic |
Author |
Message |
mstsfreak
Joined: 07 Feb 2011 Posts: 11
|
Posted: Mon Sep 16, 2013 8:37 am Post subject: Downgrading OS from 3.1.2 to 2.4.1? |
|
|
I have bought a secondhand Korg Trinity. It is the version without any expansions, the basic Trinity. However, i have OS version 3.1.2 installed on it. Is this a problem? It looks likes the synth tries to find the S-bank which it doesn't have of course. Sometimes it pauses for a while when i press an option on the screen and then it goes ahead. The screen reacts like it should and i also hear the beep when pressing it, but the Trinity doesn't react always or only after a few tries.
I think, the former owner has had an expansion, but removed it to sell it or something. On the Korg site it is said that the Trinity without expansion needs the OS version 2.4.1. Should and can i downgrade to this version? |
|
Back to top |
|
|
xavier Platinum Member
Joined: 05 Feb 2002 Posts: 638 Location: Brussels, Belgium
|
Posted: Mon Sep 16, 2013 8:43 am Post subject: |
|
|
Hello,
Without MOSS-TRI, I guess it is preferable to move to version 2.4.1.
This is not a downgrade, but the switch to the "non V3" branch _________________ Regards,
Xavier Miller.
http://www.xaviermiller.be |
|
Back to top |
|
|
mstsfreak
Joined: 07 Feb 2011 Posts: 11
|
Posted: Mon Sep 16, 2013 10:36 am Post subject: |
|
|
Well, thanks. But First i will open op de Trinity to see if there really is no Moss- board inside. You'll never know.... maybe a connector is lose.... |
|
Back to top |
|
|
Timo Platinum Member
Joined: 24 Jan 2002 Posts: 3109 Location: Kaoss central, England
|
Posted: Mon Sep 16, 2013 4:04 pm Post subject: |
|
|
v3.1.2 is for any config WITH a Moss-Tri. Moss patches are stored in the M-Bank.
v2.4.1 is for all other configs WITHOUT Moss-Tri. This is the one to use if you have Solo-Tri - Solo patches are stored in the S-Bank.
It would be strange if you had v3.1.2 installed and it showed an S-Bank, like you suggested in your first post. It should only ever display an S-bank if you have 2.4.1 installed.
If you have neither Solo nor Moss installed, v2.4.1 is still the one to use. It will disregard S and M banks. _________________ [Free Moss Set For All Workstations With Moss Expansion]
[Infekted.org - Original Access Virus Forum & Community]
Trinity V3 PBS | Radias KB | Virus TI Snow | Virus Indigo 1 | 505 Groovebox |
|
Back to top |
|
|
mstsfreak
Joined: 07 Feb 2011 Posts: 11
|
Posted: Mon Sep 16, 2013 5:28 pm Post subject: |
|
|
Thanks guys, for your replies. I installed OS 2.4.1 and all works fine now! The screen now works as it should without any delay.
|
|
Back to top |
|
|
The Magic Hoof Full Member
Joined: 14 Oct 2006 Posts: 109
|
Posted: Wed Jun 17, 2015 2:20 am Post subject: |
|
|
If I have a V3 Trinity, but the MOSS board is taken out and a SOLO-TRI is put in instead, and I downgrade to the 2.4.1 software... will there be any trouble? I don't know if the V3 hardware is different from the V2 hardware at all. That's the situation I'm stuck with.
PS: did the original V2 Pro have semi-weighted keys? I know the V3 does. |
|
Back to top |
|
|
xavier Platinum Member
Joined: 05 Feb 2002 Posts: 638 Location: Brussels, Belgium
|
Posted: Wed Jun 17, 2015 6:21 am Post subject: |
|
|
Hi!
The V3 OS must only be ran on a Trinity with the MOSS-Tri board. Otherwise, you must run a V2 OS (2.4.1 is the latest).
This is not a downgrade, only a "branch" choice _________________ Regards,
Xavier Miller.
http://www.xaviermiller.be |
|
Back to top |
|
|
The Magic Hoof Full Member
Joined: 14 Oct 2006 Posts: 109
|
Posted: Wed Jun 17, 2015 2:29 pm Post subject: |
|
|
Are there any differences at all in the Trinity V3 hardware compared to the older hardware? I'm worried about chip revisions and the OS software being incompatible, or something like that.
I'm also still curious about the original V2 Pro's keys, if they were semi-weighted or not. I'm reading conflicting reports that the original 76 key Pro had regular plastic keys. My V3 has semi-weighted. |
|
Back to top |
|
|
|