Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Getting the Korg R3 to respond to Micro X midi bank changes

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg RADIAS / R3
View previous topic :: View next topic  
Author Message
ElasticJammer



Joined: 13 Sep 2016
Posts: 2

PostPosted: Tue Sep 13, 2016 4:28 am    Post subject: Getting the Korg R3 to respond to Micro X midi bank changes Reply with quote

Hello all, first time posting here...I hope I'm in the right area.

Basically Im just getting into synths and got myself an R3 and MicroX.

I'm trying to get the R3 to change banks or even programs every time I switch the multi mode patch on the MicroX so that when performing live I can just turn one knob and be ready to go per song.

Micro X settings

Multi mode
track parameters-
Midi track 7
EX2
midi channel 10
MSB-0
LSB-0......Ive tried 32,20,0 based on info Ive found online

R3 settings

midi channel 10

The most I can get to happen is the program button on the R3 will jump back to the first button when I switch the status on the micro x from BTH to EX2

I hope this makes sense. Any input will be greatly appreciated

-Brian
Back to top
View user's profile Send private message
OpAmp
Platinum Member


Joined: 07 Jun 2013
Posts: 1173
Location: Brussels, BE

PostPosted: Tue Sep 13, 2016 10:47 pm    Post subject: Reply with quote

Hi,

Not sure it is of any help, because I don't own any of them...

The programs on the R3 are organized in 16 banks of 8 programs, giving 128 programs. But this is more from a user interface point of view.
In its MIDI implementation, all the programs are mapped into 1 MIDI bank that supports the 128 programs. The MIDI bank has 0 for both the MSB/LSB. So that setting is fine.

I would make sure that all your multi-mode sets that you use have midi track 7 set to ex2 + the right MSB/LSB, make sure there are no duplicates for MIDI channel 10 and then try to switch between those multi-mode sets. You may consider combi mode as well.

It may help to hook up the microX to a PC with a MIDI interface and use e.g. MidiOx to see what the microX sends out when changing the multi-mode set.

Good luck
_________________
microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G
Back to top
View user's profile Send private message
ElasticJammer



Joined: 13 Sep 2016
Posts: 2

PostPosted: Tue Sep 13, 2016 11:20 pm    Post subject: Reply with quote

Yes Thank you for your response.

I got the R3 to respond to program changes quite easily with an Akai MPD232
so It must be the Micro X

It probably has something to do with using multi mode.

I'll try that MidiOx. Thanks again
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg RADIAS / R3 All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group