View previous topic :: View next topic |
Author |
Message |
markireland
Joined: 24 Feb 2011 Posts: 20
|
Posted: Sun Mar 19, 2017 8:28 am Post subject: MS20c patch cables not working |
|
|
My legacy software and the MS20c controller are working except for the patch cables. I plug and unplug the cables and the software does not reflect the change.
I am on windows 7 64bit |
|
Back to top |
|
|
monomo
Joined: 30 Dec 2013 Posts: 43 Location: NYC
|
Posted: Sat Apr 01, 2017 8:57 am Post subject: Re: MS20c patch cables not working |
|
|
This is only the MS20, as I know of no other patch cables for any of the korg legacy synths that use patch cables.
Here's the thing with that.
Not all sounds will be influenced by your patching of cables, due to how it's patched, and what you are using with the knobs.
Load an MS20 PRESET. Not your own patch please.
Now if you start taking out the patch cords/cables one by one, you will notice a change in tone for at least some of them.
It's important to note that not all cable patching is going to influence the sound.
markireland wrote: | My legacy software and the MS20c controller are working except for the patch cables. I plug and unplug the cables and the software does not reflect the change.
I am on windows 7 64bit |
_________________ Monomo Sound -Korg Analog Edition - MicroKorg XL+ sounds |
|
Back to top |
|
|
markireland
Joined: 24 Feb 2011 Posts: 20
|
Posted: Tue Apr 04, 2017 12:51 am Post subject: I plug and unplug the cables and the software does not refle |
|
|
I did not make myself clear.
When I plug or unplug a patch cable on the MS20c controller I expect the software screen to show this change. It certainly used to.
But now the software screen does not reflect this change.
I am not talking about what you hear, only what you see. |
|
Back to top |
|
|
slug Senior Member
Joined: 03 Aug 2007 Posts: 371
|
Posted: Fri May 26, 2017 4:03 am Post subject: |
|
|
You dont say, but i presume that the keyboard and knobs are still sending MIDI to the Legacy MS20 app? |
|
Back to top |
|
|
markireland
Joined: 24 Feb 2011 Posts: 20
|
Posted: Tue May 30, 2017 12:16 am Post subject: |
|
|
slug wrote: | You dont say, but i presume that the keyboard and knobs are still sending MIDI to the Legacy MS20 app? |
Yes. It is only the virtual cables that are not working. |
|
Back to top |
|
|
|