View previous topic :: View next topic |
Author |
Message |
logicbdj@hotmail.com
Joined: 01 Jun 2017 Posts: 1
|
Posted: Thu Jun 01, 2017 2:48 pm Post subject: Kaossilator Pro+ (2 questions on MIDI control and sound) |
|
|
1. For some reason I get no sound from the Vocoder patches (#235-249); any clues?
2. I want to use the unit as a MIDI controller... I press shift + ext ctr ( and it works fine... I can trigger sounds from a different module. However, the Gate ARP function does not work. Am I able to make this work so that I can create an arpeggio effect with the sounds from a different module? Any direction helpful. |
|
Back to top |
|
|
Spheric El Platinum Member
Joined: 21 Jul 2014 Posts: 795 Location: Liverpool
|
Posted: Thu Jun 01, 2017 7:57 pm Post subject: |
|
|
Not used the KO pro (just KP3) but here goes..
1 Vocoder needs an input signal to work with ,traditionally a vocal. I guess KOpro has an audio input..edit - yes it has a line in phono on back and a mic on the front. Try feeding it an external signal ,from a mic maybe or a radio station from your phone..anything really.
2 the midi isnt straight pitch note info - its midi continuous controller msgs . This makes it difficult to do what you ask. there is topics here about software that will convert your xy touch CC msgs to note on messages ,but you will have to look for them ..unless someone else can post here to help you.
Good luck |
|
Back to top |
|
|
Spheric El Platinum Member
Joined: 21 Jul 2014 Posts: 795 Location: Liverpool
|
Posted: Thu Jun 01, 2017 8:03 pm Post subject: |
|
|
Edit - I jus re read your post.
You say (for 2) that your midi controller works fine with shift & ext control..
ok my KP3 sends midi CC 12 & 13 with XY commands (touch pad) when in normal playback mode. I would of thought that KOpro would be the same.
Can you try different settings on your hardware - look for CC settings and set them to 12 & 13. Guessing here. |
|
Back to top |
|
|
|