I took off all the screws that I can.. the tape that was holding the keybed... I cannot seem to remove the keybed to get to the key contacts to change them due to spilling some drink on it...
Any advice, pictures, video showing how to do this would be much appreciated. I looked everywhere. Even the manual shows how things seem to be connected, but things are not coming apart easily.
Thanks
Trying to Change Korg M3 Key Contact - But Cannot Remove Key
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Do not worry figure it out. It is a pian....
I will take pictures and place it on the forum after I put things together. Just ordered the 12 contact key piece from ebay. A $10 part... Just to give an idea, it will take about 1-1.5hrs to fix.. just in case someone ever takes it in to get fixed for labor... There are allot of screws to take off.. and if you do not know, they are in strategic places...
Taki
I will take pictures and place it on the forum after I put things together. Just ordered the 12 contact key piece from ebay. A $10 part... Just to give an idea, it will take about 1-1.5hrs to fix.. just in case someone ever takes it in to get fixed for labor... There are allot of screws to take off.. and if you do not know, they are in strategic places...
Taki
Well.. I did get the contact strips, but they did not fit good... and did not work all keys when I put back together. Then I placed the previous strip, got the kyes that normally work working, but then affected a diffeerent part of the strip and some other keys are not working. My suggestion is not to mess with it yourself.
Takis
Takis