|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
Sadrand
Joined: 04 Apr 2018 Posts: 4
|
Posted: Tue May 22, 2018 9:45 pm Post subject: EXP-2 as volume control with Kross 2 problem |
|
|
Anyone successfully using the EXP-2 as a volume pedal with Kross 2? I have assigned the pedal to “Master Volume” internally (G input/Control>foot) as the Kross 2 manual instructs but the box instructions for the pedal has no help for volume. I am using the orange cable that came with the pedal and have tried plugging it into all three input/outputs of the pedal but it does nothing. It is plugged into the assignable pedal jack on the korg. Thanks,in advance for your help. |
|
Back to top |
|
|
yvon
Joined: 26 Nov 2017 Posts: 2 Location: near Sudbur, Ontario, Canada
|
Posted: Sat May 26, 2018 9:20 am Post subject: setting the assignable exp.2 foot controller |
|
|
Sandrand,
Having here in Canada same problem as you on a PA 4X. Working with Korg but getting nowhere. I have temporaly set a Casio Master volume controller in a few seconds, its working just fine. _________________ Yvon, yamaha705, korg pa 300, Roland KR3000 |
|
Back to top |
|
|
Sadrand
Joined: 04 Apr 2018 Posts: 4
|
Posted: Sat May 26, 2018 10:18 pm Post subject: |
|
|
Thanks for the reply, yvon, i suspect I am not connecting it properly, but since there are no instructions at all about connecting the pedal as a volume controller, I am not sure how to proceed. The box states the included cable is to be used for expression only, but there is no information about what should be used instead. The Korg website is no help. I would appreciate you letting me know if you get a solution from customer service. Thanks. |
|
Back to top |
|
|
onsenonsen Junior Member
Joined: 29 Mar 2016 Posts: 75
|
|
Back to top |
|
|
yvon
Joined: 26 Nov 2017 Posts: 2 Location: near Sudbur, Ontario, Canada
|
Posted: Wed May 30, 2018 7:55 am Post subject: Re: setting the assignable exp.2 foot controller |
|
|
yvon wrote: | Sandrand,
Having here in Canada same problem as you on a PA 4X. Working with Korg but getting nowhere. I have temporaly set a Casio Master volume controller in a few seconds, its working just fine. |
Well, here we are, the Korg Exp. 2 pedal is now doing the job. Seems to be of importance, when setting for first time, have power off, plug the orange cable in the pedal assignable (not into the damper jack) after turning the PA4X on, go on to global, click on to controllers, at bottom of screen click on foot, choose what you would like to control on display, then, calibrate the exp.2 pedal with the instruction on the display. Different functions can now be given without turning power off.
Korg Canada were very helpful in getting this straight
Thanks onsenonsense for the link.
Hoping this will help you Sandrand, the Kross 2, must be very similar when it comes to assignables. _________________ Yvon, yamaha705, korg pa 300, Roland KR3000 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|