Korg Forums

rmdrent · Joined: 16 May 2012 Posts: 28

This should be an easy one but can't quite figure this one out.
Building a combi where I have organ on seperate channel and I need to change the release time so that it fades out nicely when chord is played. Usually just go to the control surface tab/tone adjust/ and change one of the release times to accomplish this, but this doesn't seem to work on an organ patch? suggestions?
Thank you..

jeebustrain · Posted: Sat Nov 24, 2018 3:47 am Post subject:

I believe you'll need to use one of the sampled organ patches. A real tonewheel organ has no such capability, so thus the CX3 engine won't.
_________________
::: Korg Kronos 88 ::: Alesis Fusion 8HD ::: Kurzweil PC361 ::: Roland V-Synth ::: DSI Prophet 12 ::: DSI OB-6 ::: Korg Prophecy ::: Moog Micromoog ::: Yamaha CP-30 ::: Alesis Andromeda ::: Moog Sub37 ::: Sequential Prophet 600 ::: Korg MS2000BR ::: GSI Burn :::

My Music

rmdrent · Joined: 16 May 2012 Posts: 28

ok, that makes sense...Coming from the M50, still trying to figure this thing out.. This basic combi is for a "Breakdown" Petty cover...has that one sustained organ fade at the bridge...thanks..

stevewahl · Junior Member Joined: 03 May 2017 Posts: 52

I'd guess the original was probably done with the volume pedal. I would bet that you can do this with a pedal (continuous, not a footswitch) set to expression and that the organ engine would respond to that, but I'm not 100% certain.
_________________
Equipment: Kronos 2 61, Kronos X 61, JP-08, Integra-7, Miniak, JV-1080, Ensoniq VFX & VFX-SD.