Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SCSI to SD Card Solution (Relatively New)

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Triton Rack
View previous topic :: View next topic  
Author Message
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3041
Location: Topeka, KS (USA)

PostPosted: Mon Mar 23, 2020 2:27 am    Post subject: SCSI to SD Card Solution (Relatively New) Reply with quote

I have a Triton-Rack and I recently ordered an external SCSI to SD card device, specifically a

SCSI2SD v5.5 (Pocket Edition)
(approximately $75 U.S.)

I purchased mine from eBay, the seller was Inertial Computing.
https://store.inertialcomputing.com/product-p/scsi2sd-v5.5.htm

[You can also find these on eBay, searching on "SCSI2SD"]

The V5.5 version is designed as a simple external drive that plugs directly into the back of your old machine or sampler. No cables required.
Power is provided by the host itself (in this case the Triton-Rack); it supplies terminator power on pin25 of the DB25 socket.

NOTE: This is the SCSI2SD V5.5 version ONLY; I don't know if the other versions or models work!









The SCSI2SD V5.5 device has three interfaces on it:
-- a microSD card slot
-- a USB 2.0 micro-B port
-- a male DB25 SCSI socket

The SCSI2SD V5.5 device simply plugs in to the 25-pin SCSI port
[You must have the Korg EXB-SCSI expansion device installed in your Triton-Rack or Triton Classic].

I installed a SanDisk microSDHC 32GB card, but the Triton Operating System won't allow you to use/see more than 4GB of storage.

I used the following procedure to set this up:
-- format the microSD card on your computer (I used Windows 10)
-- insert the microSD card into the SCSI2SD V5.5 microSD card slot
-- power off your Triton (Rack or Classic)
-- insert the SCSI2SD V5.5 device into the Triton SCSI port
-- power on the Triton
-- go to DISK Mode and find the SCSI drive. The display will say "Unformatted"
-- use the Triton-Rack (or Triton Classic) to format the SCSI drive (I gave mine the Volume Name of "SCSI_DRIVE")
-- the SCSI drive will be formatted at a size of 4GB
-- the SCSI drive is ready for use

Also, here is the main WIKI page for the SDCSI2SD (there are multiple versions and form factors)
http://www.codesrc.com/mediawiki/index.php/SCSI2SD
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3041
Location: Topeka, KS (USA)

PostPosted: Fri Mar 27, 2020 3:40 am    Post subject: Reply with quote

Update:

Using the available SCSI2SD V5 Configuration Utility, I was able to create FOUR SCSI drives on my microSD Card.

Each drive is formatted on the Triton-Rack at 4GB, so I now have 16GB of storage on a single microSD Card.
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
martin9791



Joined: 03 Jun 2020
Posts: 6

PostPosted: Wed Jun 03, 2020 2:54 pm    Post subject: ? Reply with quote

Excuse my ignorance. Can i load the sounds of https://www.synthonia.com/marketplace/korg-sounds/triton-karma-series/korg-triton-classic-g-piano-detail on this card and read them with my triton classic? Thank you!
Back to top
View user's profile Send private message Send e-mail Visit poster's website
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3041
Location: Topeka, KS (USA)

PostPosted: Thu Jul 16, 2020 2:57 am    Post subject: Re: ? Reply with quote

martin9791 wrote:
Excuse my ignorance. Can i load the sounds of https://www.synthonia.com/marketplace/korg-sounds/triton-karma-series/korg-triton-classic-g-piano-detail on this card and read them with my triton classic? Thank you!

Yes, assuming you have at least 64mb is Sample ram installed, which, according to the library you reference, is the minimum ram requirement for that library.

Think of this device as a flash based external hard drive. It can hold anything a SCSI drive could hold.
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
michelet
Full Member


Joined: 20 Mar 2006
Posts: 129
Location: Mestre VE - Italy

PostPosted: Thu Nov 12, 2020 7:16 pm    Post subject: Reply with quote

Thanks for your suggestion. I've just bought a Triton Rack without SCSI card and I'm thiniking to follow your directions to add a SCSI mass storage device
_________________
Life without music would be a mistake
Back to top
View user's profile Send private message Send e-mail
michelet
Full Member


Joined: 20 Mar 2006
Posts: 129
Location: Mestre VE - Italy

PostPosted: Mon Nov 16, 2020 6:26 pm    Post subject: Reply with quote

MartinHines wrote:
Update:

Using the available SCSI2SD V5 Configuration Utility, I was able to create FOUR SCSI drives on my microSD Card.

Each drive is formatted on the Triton-Rack at 4GB, so I now have 16GB of storage on a single microSD Card.

Would you be so kind to elaborate a little more and explain how you created those 4 partitions? What parameters were used?
Thanks
_________________
Life without music would be a mistake
Back to top
View user's profile Send private message Send e-mail
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3041
Location: Topeka, KS (USA)

PostPosted: Wed Nov 18, 2020 4:33 am    Post subject: Reply with quote

SCSI2SC Device Setup
==================
This Chicken Systems guide might be helpful:
I used this Chicken Systems Help Document as a guide:
http://www.chickensys.com/_docs/scsi2sd_online.pdf

Key constraints:
1) The Triton OS can see SCSI Drives with a maximum size of 4GB
2) The SCSI2SD Utility allows you to create a maximum of 4 SCSI IDs on a single microSD card
Therefore, you get a maximum of 4x4GB = 16GB of storage your Triton can access.

Note: Remember that the Triton Rack/Studio has a maximum Sample RAM of 96MB, meaning you can only load 96MB of data from a SCSI drive into the Triton at one time.

I used two utilities:

1) an SD Card Formatter
I used the SD Association SD Memory Card Formatter
https://www.sdcard.org/downloads/formatter/

2) The SCSI2SD Utility
The CodeSource Wiki page
http://www.codesrc.com/mediawiki/index.php/SCSI2SD
-- "DOWNLOAD" section half-down the page.
-- "downloads for v3/v4/v5"
-- I used the Window 64-bit version
http://www.codesrc.com/files/scsi2sd/latest/windows/64bit/scsi2sd-util.exe


*** PROCESS I FOLLOWED ***
1) Starting with a blank microSD card and a microSD card reader, use an SD Card Formatter to format the card so Windows can see it.
At the end of this process, I had a formatted 32GB card that was visible to Windows (Windows Explorer shows a formatted size of 29.7 GB)

2) I removed the formatted microSD card from the reader, and inserted it into the SCSI2SD v5.5 device, and then connected that device to my computer via a microUSB to USB cable.

3) Create SCSI Partitions Using the SCSI2SD Utility
- General Settings Tab (use default)
- Device 1 Tab: click "Enable SCSI Target", set SCSI ID = 0, set SD card start sector to "AUTO", set Device Size = 4GB
- Device 2 Tab: click "Enable SCSI Target", set SCSI ID = 1, set SD card start sector to "AUTO", set Device Size = 4GB
- Device 3 Tab: click "Enable SCSI Target", set SCSI ID = 2, set SD card start sector to "AUTO", set Device Size = 4GB
- Device 4 Tab: click "Enable SCSI Target", set SCSI ID = 3, set SD card start sector to "AUTO", set Device Size = 4GB

At this point, the utility is set to create 4 SCSI partitions on the microSD drive (SCSI IDs 0, 1, 2, and 3).

Select "File", then "Save to Device". A "Save Complete" window appears. Click "Close", then close the SCSI Utility.

At this point, if you stick the microSD card back into a normal reader, it DOES NOT show any SCSI partitions.

4) Insert the microSD card into the SCSI2SD V5.5 microSD card slot
5) power off your Triton (Rack or Classic)
6) Attach the SCSI2SD V5.5 device into the Triton SCSI port
7) Power on the Triton
8 ) Go to DISK Mode and find the SCSI drive (there should be four drives, SCSI IDs 0, 1, 2, and 3). The display will say "Unformatted"
9) Use the Triton-Rack (or Triton Classic) to format the SCSI drive (I gave mine the Volume Name of "SCSI_DRIVE_1")
-- the SCSI drive will be formatted at a size of 4GB
-- the SCSI drive is ready for use
10) Go to the next SCSI ID, and format the second drive (I gave mine the Volume Name of "SCSI_DRIVE_2")
11) Go to the next SCSI ID, and format the second drive (I gave mine the Volume Name of "SCSI_DRIVE_3")
12) Go to the next SCSI ID, and format the second drive (I gave mine the Volume Name of "SCSI_DRIVE_4")

FINAL TASKS
------------------
At this point, if you put the microSD card into a SD card reader in Windows 10, you should see 5 Drives:
-- SCSI_Drive 1 (4 GB)
-- SCSI_Drive 2 (4 GB)
-- SCSI_Drive 3 (4 GB)
-- SCSI_Drive 4 (4 GB)
-- Other (the remaining 13 GB).
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
Vesa
Platinum Member


Joined: 05 Jan 2002
Posts: 1029
Location: Sweden

PostPosted: Thu Sep 09, 2021 6:19 pm    Post subject: Reply with quote

Wow !

I knew there were floppy to some Jaz drive mods many years ago, and recently found floppy to USB, but I don't want a USB sticking out, something easily gets damaged so I searched for floppy to SD and later SCSI to SD and here I am again, almost 20 years since I registered!

My Triton-Rack has been at the attic for 15 years atleast, I brought down the small module Roland JV-1010 few days ago but 20 minutes ago I fetched my Rack.

Opened it, saw the 3x32MB ram sticks, but wth is that card at the end?
LOL, turns out I have EXB-PCM01 installed! That is the Pianos/Classic Keyboards expansion, I don't remember anything about having this! What an addition!

I used a SCSI HD back in the days, but it was too much hustle IMO... I have even thrown it away like 15 years ago, but ofcourse kept the RAM and SCSI interface.

Now I'm gonna buy that SCSI to SDHC adapter and fiddle with samples Smile There are interesting tiny sounds on the JV-1010 that are nice in their pads, will capture those to start with.

Speed wise, I assume a SDHC is not a bottle-neck (vs old SCSI HDs from early 2000s), while a mod thru floppy perhaps would be?

There are cheaper 32GB SDHC with ~100-120MB/s read capacity, specs say nothing about write speed. The more expensive is 100MB/s read, 90MB/s write. Swedish money $7 vs $11 perhaps, suggestion on what to buy?

Edit: Googled SanDisk microSDHC 32GB and found SanDisk Ultra microSDHC Class 10 UHS-I U1 A1 --- Read 98MB/s, Write 32GB/s (U1 only guarantees 10MB/s write, but perhaps i's normal speel is 32MB/s) - found out that U1 is a guaranteed lowest writing speed, U1 = 10MB/s, U3 = 30MB/s
These is also a Video Speed Class, it guarantees write speed the in a similar way, V90 = U9 = minimum 90MB/s write speed

Good to be back Smile
_________________
Roland JV-1010 / Triton-Rack 96MB / Trinity Plus PBS-TRI / Yamaha MOTIF6 64MB / Roland Fantom-XR 512MB / Yamaha MOXF6 1GB / Roland XV-3080 / Roland FANTOM-06 / Yamaha MODX6+ / E-mu Proteus 2000 / Roland XV-5080 128MB / Kross 1 / Kross 2


Last edited by Vesa on Thu Sep 09, 2021 7:13 pm; edited 2 times in total
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Vesa
Platinum Member


Joined: 05 Jan 2002
Posts: 1029
Location: Sweden

PostPosted: Thu Sep 09, 2021 6:50 pm    Post subject: Reply with quote

MartinHines wrote:

At this point, if you put the microSD card into a SD card reader in Windows 10, you should see 5 Drives:
-- SCSI_Drive 1 (4 GB)
-- SCSI_Drive 2 (4 GB)
-- SCSI_Drive 3 (4 GB)
-- SCSI_Drive 4 (4 GB)
-- Other (the remaining 13 GB).


Why 5 partitions/drives? Is it possible to get 7x4GB (28GB) + rest?
_________________
Roland JV-1010 / Triton-Rack 96MB / Trinity Plus PBS-TRI / Yamaha MOTIF6 64MB / Roland Fantom-XR 512MB / Yamaha MOXF6 1GB / Roland XV-3080 / Roland FANTOM-06 / Yamaha MODX6+ / E-mu Proteus 2000 / Roland XV-5080 128MB / Kross 1 / Kross 2
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Triton Rack All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group