View previous topic :: View next topic |
Author |
Message |
MartinC
Joined: 21 Apr 2020 Posts: 7
|
Posted: Mon Dec 06, 2021 2:39 am Post subject: Drum Track doesn't play in Program or Combi mode |
|
|
Hi,
I really can't figure it out. Drum track on the Kronos 2 doesn't play in neither program or combi mode.
The Drum Track knob is lit ready for the trigger that never comes. In program mode, in the upper right corner there is the tempo, a quarter note = 110, showing, I presume, that the Kronos in not slaved to an external clock.
I went through all settings in global mode but I can't figure it out what the problem is.
I use the Kronos mostly by itself but recently it has been hooked to my MacBook Pro.
I hope someone on that Forum can help me to fix that issue.
MartinC |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Mon Dec 06, 2021 11:34 am Post subject: |
|
|
In the Kronos Operations Guide, page 273, there are several drum track troubleshooting suggestions.
. |
|
Back to top |
|
|
MartinC
Joined: 21 Apr 2020 Posts: 7
|
Posted: Mon Dec 06, 2021 4:16 pm Post subject: |
|
|
voip wrote: | In the Kronos Operations Guide, page 273, there are several drum track troubleshooting suggestions.
. |
Thanks! After your post, I gave a closer look to the settings and everything looks normal. What I found though is that all UserBank for drum track in program or Combi mode have disappeared.
For example: I-010 Beautiful Piano
Common/Drum track/Drum Track Parameters - Program - U-AA 109----
The program is empty. It seems all user banks are empty. From U-G to U-CC everything has disappeared. I really don't understand how it has happened.
If in Drum Track Parameters - Program - I select another program for instance in Drum bank or SFX
Bank, then everything works as it should.
I have installed KAPro Symphonic Dreams lately I might have done something I shouldn't...
Do you have an idea about what could have happened and how do I restore those U-!!! Programs?
Thanks for your help it is appreciated.
MartinC |
|
Back to top |
|
|
MartinC
Joined: 21 Apr 2020 Posts: 7
|
Posted: Mon Dec 06, 2021 4:36 pm Post subject: |
|
|
I have finally solved this issue. I had to restore default from Disk Menu - Utility and everything is back to normal except that I must rebuild my Set List
But at least some of the changes were on a Flash drive.
Thanks Voip your input directed me toward the solution.
MartinC |
|
Back to top |
|
|
tunaman Senior Member
Joined: 28 Nov 2019 Posts: 427
|
Posted: Wed Dec 08, 2021 5:21 pm Post subject: |
|
|
Just an FYI for anyone who might face this issue in the future and read through this thread - one can locate the original PCG in the Factory directory (presuming they didn’t delete it) and drill down to the specific Program and Combination banks, then re-insert them from there.
That will only restore the original Program/Combination data and not affect Setlists or other custom PC data (presuming that user data was not loaded in those locations).
And as always, a great reminder to backup often, especially before and after any changes are made. |
|
Back to top |
|
|
|