View previous topic :: View next topic |
Author |
Message |
marcos
Joined: 03 Feb 2022 Posts: 10
|
Posted: Thu Feb 03, 2022 10:37 am Post subject: loading multiple sets |
|
|
HI
what is the best way when loading multiple sets, without the risk of overwriting?
When loading different sets, I'm afraid sounds are overwriting...
any ideas?
Thanks |
|
Back to top |
|
|
siebenhirter Platinum Member
Joined: 13 Oct 2011 Posts: 1844
|
Posted: Thu Feb 03, 2022 12:37 pm Post subject: Re: loading multiple sets |
|
|
marcos wrote: | .. what is the best way when loading multiple sets, without the risk of overwriting? .. |
Problematic of merging sets has been extensively discussed here several times.
For Styles & KbdSets that are not assigned exclusively with sounds of factory resources but also with user sounds AntonySharmman mentioned "Merging 2 or more sets is not an easy workflow that can be explained in a few lines topic ...":
http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=111124 .
http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=126395 _________________ kind regards
- siebenhirter, austria -
Interesting facts about styles and stylePlayer functions can be found at http: www.elmarherz.de |
|
Back to top |
|
|
Biggles Platinum Member
Joined: 31 Aug 2017 Posts: 1013
|
Posted: Thu Feb 03, 2022 3:58 pm Post subject: |
|
|
As Sibenhirter stated it is problematic.
I found that some Style sets would install from used 1 bank 1 without asking whilst other would ask where.
To get round it:-
Install style pack to user 1 bank 2 then copy and paste each one to a location further in the memory, this is imo no bad thing as it lets you place each of them in a created user category ie pop, ballroom, rock etc
Delete the source styles
Create a Save All file
Then install the next Style pack to User 1 Bank 1 and repeat. _________________ Biggles
Lancashire, UK |
|
Back to top |
|
|
siebenhirter Platinum Member
Joined: 13 Oct 2011 Posts: 1844
|
Posted: Thu Feb 03, 2022 7:21 pm Post subject: Merging Sets with user sounds / user DKs |
|
|
Hello,
when loading a style or kbdset from a set, none of its user sound and samples is loadet automatically and thus causes errors.
If there are user sounds/user dks in a set, methods as described by Anthony are necessary (--> http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=111124 ).
With user sounds/dks is necessary to open every sound bank separately< (SETx.ALL/open/SOUND/open) click on USERx bank and load existing user sounds and user dks partially one by one.
That automatically will load the required PCM samples without to overwrite existing user sounds in memory. After that load style banks and kbd set banks. Then remap user-sounds/dks in its tracks to memory-locations of automatically created user sounds/dks with the above procedure.
If there are no user sounds/user dks in a set, it is ok to install resource packs without to open / load sound banks separately as recommended. _________________ kind regards
- siebenhirter, austria -
Interesting facts about styles and stylePlayer functions can be found at http: www.elmarherz.de |
|
Back to top |
|
|
marcos
Joined: 03 Feb 2022 Posts: 10
|
Posted: Fri Feb 04, 2022 4:09 am Post subject: |
|
|
thanks for your reply.
so is it correct to assume the sequence is to load the sounds first? then styles?
all the other folders can be ignored? like the PCM, etc |
|
Back to top |
|
|
siebenhirter Platinum Member
Joined: 13 Oct 2011 Posts: 1844
|
Posted: Fri Feb 04, 2022 1:43 pm Post subject: Merging Sets with user sounds / user DKs |
|
|
marcos wrote: | .. is it correct to load the sounds first? then styles? .. all the other folders can be ignored? like the PCM, etc |
yes --> http://www.korgforums.com/forum/phpBB2/viewtopic.php?p=740871#740871
For remapping user-sounds/-DKs of styles tracks the SAMPLES associated with the usersounds are NOT to notify, because loading user-sounds/DKs (the fundamental prerequisite before loading musical resources of a set) automatically writes and organize sounds/DKs with its multisamples (KMP) und its samples (PCM) into memory. For remapping only the link to soundlocation in soundbank (...pcg) is to notify.
In most simple case you get a set with styles in any user-style-bank and (maybe for example) with user-sounds in user04.pcg and userDK02.pcg. If user04.pcg and userDK02.pcg of your arranger are still free and not occupied with other data NOTHING IS TO NOTIFY OR TO REMAP, if you load sound banks user04.pcg and userDK02.pcg of the set to same location of your arrangers memory, before you load styles or style-banks.
That is because in example above links in the new set (maybe saved on an USB stick) of user-sounds / -DKs refers to user-sounds of user04.pcg and userDK02.pcg of the USB stick. If you first loaded banks user04.pcg and userDK02.pcg to same (free) banks of your arrangers memory, user sounds and DKs are located to same user banks as of USB-stick. So loaded resources (styles, kbdsets etc) are linked to same correct locations in memory; without to be remapped for styles tracks.
PS: On my opinion with some few user-sounds/-DKs that is much more efficient for a hobby keyboard player as to use expansive software for saving different sets beforehand on the PC, to organize them there and to save them to be able to load the result as a new set into the arranger. _________________ kind regards
- siebenhirter, austria -
Interesting facts about styles and stylePlayer functions can be found at http: www.elmarherz.de |
|
Back to top |
|
|
|