Korg Forums

[Jay123]

Hi,
This question is about the Korg Triton Pro.

I want there to be two main outputs.

I know there is one main audio output (the right and Left/mono).

I was wondering if i can someway configure (possibly through the menu options) another main audio output through the individual outputs(1,2,3,4) to make it the like the main output so I have two main audio outputs.

I want to connect one of the main audio outputs to a Mbox3 with studio monitors and the other one to an amp.

This way I don't have to turn the computer and studio monitors on when I just want the Korg Triton pro to be on with the amp and I don't have to keep plugging-in and unplugging the 1/4 cords to different connections.

any ideas?

thanks

[ErnstDabest]

The headphone jack in front of the keyboard near the floppy drive; use it along w/ the main output in the back..
Could also use a quater-inch audio patchbay if you have one available, if-not they go pretty cheap these days.

[Jay123]

Thanks,

something like this would do for the patchbay, right?

http://www.sweetwater.com/store/detail/TPatch


also, would a patchbay even out the Left/mono issue?

everytime I record the left/mono sounds lower-volume and I have to adjust it.[/url]

[ErnstDabest]

Yes, as long the patchbay has half-normal configurations it'll do. If the problem exist in both main output and headphone output then
your Triton may require some tlc, but before you clean it I would check to see whether the sound isn't slightly panned to the right ?

[Jay123]