| View previous topic :: View next topic |
| Author |
Message |
Trakun
Joined: 05 Nov 2016
Posts: 3
|
 Posted: Sat Nov 05, 2016 5:54 pm Post subject: Problem XY + Gate Nanopad 2 |
 |
|
| Hi everyone! I have a problem with my Nanopad 2. When i touch the XY nanopad it sends only one note ( how can i change it back to scale? ). When i press Gate ARP it is very slow ( how can i change the speed ). Thank you! |
|
| Back to top |
|
 |
Trakun
Joined: 05 Nov 2016
Posts: 3
|
| Posted: Mon Nov 14, 2016 7:16 pm Post subject: |
|
|
| nobody knows? |
|
| Back to top |
|
|
voip
Platinum Member
Joined: 27 Nov 2014
Posts: 3772
|
| Posted: Mon Nov 14, 2016 8:45 pm Post subject: |
|
|
The Arp speed can be set by double-tapping the Scale/Tap button, in time with the desired tempo. Gate Arp needs to be selected for this to work.
The slowness of the Gate Arp may be the reason why only one note sounds.
. |
|
| Back to top |
|
|
Trakun
Joined: 05 Nov 2016
Posts: 3
|
| Posted: Fri Nov 18, 2016 5:41 pm Post subject: |
|
|
| voip wrote: | The Arp speed can be set by double-tapping the Scale/Tap button, in time with the desired tempo. Gate Arp needs to be selected for this to work.
The slowness of the Gate Arp may be the reason why only one note sounds.
. |
Thx! I fixed the arp speed but in Touch Scale mode why when i press on XY pad i got only one note? How do i make it default to make flam/rolls? |
|
| Back to top |
|
|
voip
Platinum Member
Joined: 27 Nov 2014
Posts: 3772
|
| Posted: Mon Nov 21, 2016 10:13 pm Post subject: |
|
|
Roll type sounds can be obtained by selecting Gate Arp (no other buttons lit), holding down one (or more) of the pads, then using the XY pad to vary velocity and rate of the repeated notes.
. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
