|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
blackwater
Joined: 08 Sep 2017 Posts: 2
|
Posted: Fri Sep 08, 2017 11:22 pm Post subject: Tap Tempo and Sequencer Start/Stop with FCB1010 |
|
|
Hello,
I am new to the board.. this is my first post. I looked around for similar threads but no-one seems to have my exact problem.
I am trying to simultaneously control both tap tempo and start/stop on the sequencer from a Behringer FCB1010 foot controller with no luck. I can get tap tempo to work if I connect it to the TE's foot switch input, but this input is also where start/stop would need to be assigned, so it seems like you can't do both at the same time.
Is there a way to control start/stop via MIDI control change messages? Or, maybe sysex (not sure if the fcb1010 can send sysex in real time..)?
Any help would be appreciated.
thanks! |
|
Back to top |
|
|
blackwater
Joined: 08 Sep 2017 Posts: 2
|
Posted: Mon Sep 11, 2017 9:43 pm Post subject: |
|
|
for anyone interested.. I solved this, although I used a different approach. For what I am doing, I just needed to trigger a short pattern, so I ended up using RPPR in a sequence, triggered by a note number sent from the FCB1010. I am still able to control the tap tempo at the same time using the footswitch input. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|