View previous topic :: View next topic |
Author |
Message |
DIAMANTE
Joined: 14 Sep 2017 Posts: 38 Location: Arizona
|
Posted: Fri Sep 15, 2017 6:19 pm Post subject: Transferring Sound to Combination Problem |
|
|
I fine tuned the Jazz Guitar sound (C047) to my liking. However, when I put it in a Combination mode, the sound reverts back to the original before I tweaked it to my liking. Anybody?
Thanks _________________ Formerly keyboardist with Fabian, Ted Nugent and British rock group IF. |
|
Back to top |
|
|
CowboyNQ Full Member
Joined: 28 Sep 2014 Posts: 144 Location: Adelaide, Australia
|
Posted: Sat Sep 16, 2017 1:31 pm Post subject: |
|
|
You need to save the sound first before you move it into the Combi. Just hit the "write" button and away you go.
However if you don't want to permanently alter the stock sound, you'll need to find somewhere else to save it - there's plenty of blank user slots to throw it in. Bank F I believe (my Krome lives in a rehearsal room so don't have it handy). |
|
Back to top |
|
|
DIAMANTE
Joined: 14 Sep 2017 Posts: 38 Location: Arizona
|
Posted: Sat Sep 16, 2017 4:28 pm Post subject: |
|
|
Thanks. I did save the sound first but it still reverted back to the original. However, I tweaked it in the Combo mode and it worked. Thanks again...
Gabriel _________________ Formerly keyboardist with Fabian, Ted Nugent and British rock group IF. |
|
Back to top |
|
|
yank Junior Member
Joined: 03 Feb 2013 Posts: 72
|
Posted: Sun Sep 17, 2017 1:15 am Post subject: |
|
|
The auto load EQ function in Combi mode switched on or off does make a sense. |
|
Back to top |
|
|
|