Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Try this ... Realtime Drum Loop Sequencing with RADIAS

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg RADIAS / R3
View previous topic :: View next topic  
Author Message
..::RAYGUN::..



Joined: 07 Jan 2016
Posts: 6
Location: Canada

PostPosted: Mon Jan 29, 2018 4:51 am    Post subject: Try this ... Realtime Drum Loop Sequencing with RADIAS Reply with quote

Realtime Drum Loop Sequencing with RADIAS
I discovered this by accident and it works perfectly.

Start with an initialized program.

1. Press the EDIT/YES button so it is lit up in edit mode, go to COMMON,
P02, DRUM and change it from the OFF position to the Timbre1 matching
the timbre1 you initialized, then select the drum kit # you want to use.

2. Exit the edit mode and write your program.

Now to start recording a looped drum rhythm in realtime using
the 16 numbered buttons on the RADIAS.

3. Select your drum timbre1 on the module so it flashes, then select the
ON, LATCH and STEP SEQ 1 buttons on the ARPEGGIATOR/STEP SEQUENCER.

4. Press the EDIT/YES button so it's lit and go to COMN,STEP SEQ, P15 and set
LastStep to 16 and RunMode to Loop.

6. Select the TRIGGER option from the 16Keys panel on the lower left of
the RADIAS module. Press all of the 16 buttons so they light up.

Press PAGE+ button to go to Trigger P15, STEP SEQ1. Make sure that
Note select is set to TRIGGER and all the 16 steps are on with O above
each step.

6. Now change TRIGGER to the first drum sound Drum01 ... all the 16 buttons
will be lit up and will be set to ON.

Press any key on the RADIAS keyboard to start all 16 to loop.

Press any lit button to turn it OFF or ON again. You'll hear it change in real
time. And the edit window will show you which steps are ON with an O above it.

8. Go back to the edit screen and choose another drum sound from the NoteSel.
All of the buttons will be unlit and OFF. Press a few off the 16 buttons so they
are lit up and you will hear them while it loops. Keep doing this for all the other
drum sounds you want to use to create your groove. You can edit rest/ties/gate
etc. afterwards.

9. And don't forget to WRITE and save what you've created Wink

Peace ............. Raymond Roy aka RAYGUN
https://soundcloud.com/raygun-8
Back to top
View user's profile Send private message Visit poster's website
acemonvw
Full Member


Joined: 23 Feb 2011
Posts: 125

PostPosted: Fri May 04, 2018 2:03 pm    Post subject: Reply with quote

Anyway you could post an example of what this is? It sounds cool - I should try it, but I also kinda want to just hear what you've done with it!
_________________
Radikal Technologies Spectralis II, Korg Radias, Access Virus TI polar, Roland MC-303, Korg EMX, Maschine
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg RADIAS / R3 All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group