View previous topic :: View next topic |
Author |
Message |
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 487 Location: Port Charlotte,FL
|
Posted: Tue Aug 27, 2019 7:10 pm Post subject: Updating v 2,o to 3.1.0 |
|
|
I have downloaded new OS to USB, copied my USB, which contains my direct set, to ext drive as a backup. Since I am using direct set exclusively, Pete told me not to do something, but can't find the thread.
Bernie _________________ pa4x
Audya 76
Yamaha SX900
Hammond SK1 |
|
Back to top |
|
|
Biggles Platinum Member
Joined: 31 Aug 2017 Posts: 1006
|
Posted: Tue Aug 27, 2019 7:43 pm Post subject: |
|
|
Bernie
Do a full Backup of the current OS
Then perform a SAVE ALL
Extract 3.1 to your Memory Stick on your PC and read the Installation Instructions that are with the extracted files, and follow the instructions in the file.
Once updated you will need to do a Factory Restore.
Following a restart you are good to go.
Do check that your Direct folder is still functioning and test out your own sets. _________________ Biggles
Lancashire, UK |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 487 Location: Port Charlotte,FL
|
Posted: Tue Aug 27, 2019 8:13 pm Post subject: |
|
|
Thanks Biggles
Is that the FULL RESOURCE BACKUP in Utility? _________________ pa4x
Audya 76
Yamaha SX900
Hammond SK1 |
|
Back to top |
|
|
karmathanever Platinum Member
Joined: 12 Jan 2004 Posts: 10398
|
Posted: Wed Aug 28, 2019 2:12 am Post subject: |
|
|
Hi Bernie, if you run everything from a DIRECT SET, the OS update will not affect it BUT it is always sensible to backup your DIRECT SET by "copying" it.
It is possible that you might need to re-link/assign your DIRECT SET (I think I had to do this after an OS update - can't remember which one!!)
Anyhow it's still a good idea to perform a Save All and create a full set of your internal data first - even though you are not using internal styles, this will at least enable you to return to your 2.0 status if needed.
Cheers
Pete
(In answer to one of your earlier questions, what I said NOT to do is a Save All to your DIRECT SET - that will destroy your DIRECT SET) _________________ PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music
------------------------------------------------------------------ |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 487 Location: Port Charlotte,FL
|
Posted: Wed Aug 28, 2019 8:36 am Post subject: |
|
|
Ah! That was it. I knew it had to do with "Save All". I guess I can save it to HD? _________________ pa4x
Audya 76
Yamaha SX900
Hammond SK1 |
|
Back to top |
|
|
Biggles Platinum Member
Joined: 31 Aug 2017 Posts: 1006
|
Posted: Wed Aug 28, 2019 9:43 am Post subject: |
|
|
On my USB memory stick with it in my PC I created folders one called Backup, another SaveAll and even one called Direct.
I save the OS backup to the Backup folder by naming it as the date and OS version number.
I save the save all to the SaveAll folder by naming it as the date.
This way there is no chance of me overwriting my own dot set files and it is very easy to select the correct file to reload customised content.
Yes, the folder named Direct is the one set for direct access, I am an old guy and like to keep things simple. _________________ Biggles
Lancashire, UK |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 487 Location: Port Charlotte,FL
|
Posted: Wed Aug 28, 2019 12:01 pm Post subject: |
|
|
Hi Biggles
I am an old guy, also, and agree with you. In fact, simple is mandatory. I already have installed the update with the single save method, and all appears fine. It is now time to explore the new features, thanks to you and Pete.
Bernie _________________ pa4x
Audya 76
Yamaha SX900
Hammond SK1 |
|
Back to top |
|
|
Biggles Platinum Member
Joined: 31 Aug 2017 Posts: 1006
|
Posted: Wed Aug 28, 2019 1:37 pm Post subject: |
|
|
Bernie9 wrote: | Hi Biggles
I am an old guy, also, and agree with you. In fact, simple is mandatory. I already have installed the update with the single save method, and all appears fine. It is now time to explore the new features, thanks to you and Pete.
Bernie |
Bernie
A full Backup will enable you to reinstall the version you backed up should problems arise with the update.
The SaveAll is important as it enable you to reload the customised sets you have created.
Hence running both routines is really necessary prior to updating, I only missed the SaveAll once shortly after getting my PA and I lost so much data. _________________ Biggles
Lancashire, UK |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 487 Location: Port Charlotte,FL
|
Posted: Thu Aug 29, 2019 8:55 am Post subject: |
|
|
Here is where I am confused:
I backed up full resources to ext drive.
I had copied my mem stick, which held my Direct Set I use.
I did a Save All to my Pa4x HD,
After installation, I loaded Factory Resources and re chose my Direct Set again from the mem stick. I am wondering if there is data in the Save All I may have missed. There is also a question of adding in the new music resources that is in the new update. I don't want to mess up what I have,
The only known mistake I made was to not copy my mem stick again, but chose to use my copy I had made a month ago, hence missing some data. _________________ pa4x
Audya 76
Yamaha SX900
Hammond SK1 |
|
Back to top |
|
|
rikkisbears Platinum Member
Joined: 15 Oct 2007 Posts: 1690 Location: NSW , Australia
|
Posted: Fri Aug 30, 2019 4:45 am Post subject: |
|
|
Hi Bernie,
Your save all, should open up , and you should be able to see what you saved ie styles, sounds etc. sets. So if you are missing stuff after the update, you can load it back in. That’s the idea of a Save All. _________________ best wishes
Rikki
HOBBYIST
PA5X 88 note
Wavesart CFX 9ft Grand Piano 🥰
Wavesart Japanese Grand Piano
Yamaha PSR SX900
Band in a Box 2023 |
|
Back to top |
|
|
Aripearlmusic Approved Merchant
Joined: 04 Jun 2018 Posts: 342 Location: BROOKLYN NY
|
Posted: Fri Aug 30, 2019 5:19 am Post subject: |
|
|
Do not do a full resource backup from V2 because it overwrites factory resources and the global from V2 as well as the sound order is different so it will cause problems. A save all is fine but i recommend deleting the global preset from that folder after saving. To make sure you save everything simply press Shift+Memory and uncheck all protect options from the media tab of that page then do a save all to any drive with more than 850mb free. _________________ Ari Pearl Music
@AriPearlMusic |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 487 Location: Port Charlotte,FL
|
Posted: Fri Aug 30, 2019 8:19 am Post subject: |
|
|
Thank you both. This clears things up for me, somewhat. _________________ pa4x
Audya 76
Yamaha SX900
Hammond SK1 |
|
Back to top |
|
|
|