|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
harcon01
Joined: 24 Sep 2011 Posts: 16 Location: Australia
|
Posted: Mon Jun 01, 2020 6:43 am Post subject: Cubase tips copying Controller/program changes |
|
|
Hi
I am creating styles from midi files using Cubase and following the tip to copy Controller/program changes for each track and each section (Var/Intro etc), which is providing good flexibility but is a very time consuming task.
After copying the Controller/program changes from one track (usually from the start) I am currently pasting the Controller/program changes by moving to the next section using the marker I am then having to go to the next track and do the same.
Question is there a way in Cubase to copy the original Controller/program changes across “all tracks” and then move using markers to the start of the next section (Var/Intro etc) and paste against each track the Controller/program changes as one action.
Also when I am cutting the midi file into each section, I am moving the line to the point I want to cut ,selecting scissors and I then have to go down each track to apply the cut. Is there a way to apply the cut across all tracks with one action?
Your suggestions would be appreciated _________________ Pa4x Cubase Hammond Sk1 |
|
Back to top |
|
|
mordechai
Joined: 03 May 2020 Posts: 25 Location: states
|
Posted: Fri Jun 05, 2020 4:38 pm Post subject: |
|
|
i think if you hold alt while using cutting tool it cuts across all tracks. if i remember correctly _________________ 4x |
|
Back to top |
|
|
ANAFREE Full Member
Joined: 15 Aug 2017 Posts: 119
|
Posted: Sat Jun 06, 2020 1:43 am Post subject: Re: Cubase tips copying Controller/program changes |
|
|
harcon01 wrote: | Hi
I am creating styles from midi files using Cubase and following the tip to copy Controller/program changes for each track and each section (Var/Intro etc), which is providing good flexibility but is a very time consuming task.
After copying the Controller/program changes from one track (usually from the start) I am currently pasting the Controller/program changes by moving to the next section using the marker I am then having to go to the next track and do the same.
Question is there a way in Cubase to copy the original Controller/program changes across “all tracks” and then move using markers to the start of the next section (Var/Intro etc) and paste against each track the Controller/program changes as one action.
Also when I am cutting the midi file into each section, I am moving the line to the point I want to cut ,selecting scissors and I then have to go down each track to apply the cut. Is there a way to apply the cut across all tracks with one action?
Your suggestions would be appreciated |
Hi,
https://www.youtube.com/watch?v=O1jDwv2DM6U
00:01 to 1:35 The easiest way to copy all controllers from event to different events
1:37 cut all events in the same time
some important cubase shortcuts
Hold "Alt" key to select split tool on the fly
Select midi events then hold alt / drag and drop to duplicat selected events where you want / or Ctrl+D to next bar |
|
Back to top |
|
|
harcon01
Joined: 24 Sep 2011 Posts: 16 Location: Australia
|
Posted: Sun Jun 07, 2020 8:51 am Post subject: |
|
|
ANAFREE
That's fantastic, as they say a picture is worth a 1,000 words. Thanks for going to that effort. I also picked a few other tips.
Do you have any thoughts about when you change the channel (viz bass 9 ACC1- 12 etc). The list editor shows the original channel. What I would like to do is after changing the channel try to get the Channel/Track numbers to agree. The only way I can see to change the tracks 9,10,11,12etc is to move each track individually into the new position.
Thanks again _________________ Pa4x Cubase Hammond Sk1 |
|
Back to top |
|
|
ANAFREE Full Member
Joined: 15 Aug 2017 Posts: 119
|
Posted: Sun Jun 07, 2020 11:05 pm Post subject: |
|
|
harcon01 wrote: | ANAFREE
That's fantastic, as they say a picture is worth a 1,000 words. Thanks for going to that effort. I also picked a few other tips.
Do you have any thoughts about when you change the channel (viz bass 9 ACC1- 12 etc). The list editor shows the original channel. What I would like to do is after changing the channel try to get the Channel/Track numbers to agree. The only way I can see to change the tracks 9,10,11,12etc is to move each track individually into the new position.
Thanks again |
You are welcome
mmmm i don't know if i understand you, i don't speak english very well anyway,,,, each midi note have a channel number, You must select all MIDI notes inside the event and change the channel number from Info line bar
https://www.youtube.com/watch?v=5Wb1tR-DQgQ
or you can select all midi note in the list editor and change channel number for selected notes directly
https://youtu.be/sZqoKXSRpyI |
|
Back to top |
|
|
harcon01
Joined: 24 Sep 2011 Posts: 16 Location: Australia
|
Posted: Mon Jun 08, 2020 11:22 am Post subject: |
|
|
Anafree
Once again thanks for your assistance _________________ Pa4x Cubase Hammond Sk1 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|