View previous topic :: View next topic |
Author |
Message |
Verver
Joined: 15 May 2020 Posts: 6 Location: West Indies
|
Posted: Sun Nov 08, 2020 9:41 am Post subject: WS mod Knobs sending sysex to logic |
|
|
Hello to all
Sorry I don't speak English very well.
When I use the 8 white buttons (mod Knobs) of the Wavestate logic has a weird behavior. These buttons act as if they send sysex to logic and the WS turns into a logic controller. (It starts recording or skips from measure to measure...)
I tried to disable the sysex in the input of the logic but it still works. Do you have an idea please ? |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Sun Nov 08, 2020 9:55 am Post subject: |
|
|
It may be necessary to disable or filter certain categories of control change messages, rather than SysEx, since these could be the reason for the observed behaviour. The MIDI implementation chart, at the back of the Owner's Manual, shows the MIDI messages transmitted and received by the Wavestate. Using something like MIDI-Ox will allow the MIDI traffic to be observed, and help to find the cause.
PS - Your English seems absolutely fine.
. |
|
Back to top |
|
|
Verver
Joined: 15 May 2020 Posts: 6 Location: West Indies
|
Posted: Sun Nov 08, 2020 10:03 am Post subject: |
|
|
Oh thank you very much for your kind answer "voip".
I will check the midi implementation.
Have a nice day. |
|
Back to top |
|
|
Verver
Joined: 15 May 2020 Posts: 6 Location: West Indies
|
Posted: Sun Nov 08, 2020 10:12 am Post subject: |
|
|
I found the solution thanks to your answer.
I clicked the function "ignore all control surfaces" in logic.
It's a bit annoying because it also disables some functions of my master keyboard, but I'm not bothered by unwanted sysex.
Many thanks to you |
|
Back to top |
|
|
danatkorg Product Manager, Korg R&D
Joined: 21 Jan 2005 Posts: 4204 Location: California, USA
|
Posted: Wed Nov 18, 2020 6:13 pm Post subject: |
|
|
I'm glad that you solved the problem!
The knobs send MIDI CCs, btw (as opposed to SysEx).
You can edit all of the CC assignments on the appropriately-named MIDI CC Assign page, under the UTILITY button.
Best regards,
Dan _________________ Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com |
|
Back to top |
|
|
|