Korg Forums

sparkie · Posted: Sat Aug 18, 2007 4:48 am Post subject: New M3 Demo Videos

Here is a post from someone over at Karma Labs with a link for new M3 videos.. 6 parts. Great info here.
http://www.youtube.com/watch?v=Pwmv9tDhzjY

You can find more of the same video "series" on the right. 6 total ..
Sparkie

EJ2 · Posted: Sat Aug 18, 2007 1:43 pm Post subject:

Beat me to it, Sparkie. These 6 videos with Richard Formidoni demonstrating really open up the M3 further.
Cheers,
Eric
_________________
Cheers,
Jim (aka EJ2) Karma-Lab Associate Combi Developer

CATALYST v 2 Blast of Inspiration for KRONOS & OASYS: http://www.karma-lab.com/sounds/catalyst2.html
CATALYST v 1 Combi Explosion for KRONOS, OASYS, M3, & K-M50: http://www.karma-lab.com/sounds/catalyst1.html
CHEMISTRY 3, a Groove Injection for Your Karma: http://www.karma-lab.com/sounds/chem3.html
SoundCloud MP3 Demoshttps://soundcloud.com/ej2-sc

Daz · Retired Joined: 01 Jan 2002 Posts: 10829

Thanks Sparkie !

ricky recordo · Guest

Nice find... thanks!

sparkie · Posted: Sat Aug 18, 2007 7:21 pm Post subject:

Yes those are really good. ..and long too. I still have to watch the final 2 myself.
Sparkie

EJ2 · Posted: Sun Aug 19, 2007 2:05 am Post subject:

I watched all of them and found out a few things I wasn't aware of. Richard does a really nice job. Would have been great to be there in person.
_________________
Cheers,
Jim (aka EJ2) Karma-Lab Associate Combi Developer

CATALYST v 2 Blast of Inspiration for KRONOS & OASYS: http://www.karma-lab.com/sounds/catalyst2.html
CATALYST v 1 Combi Explosion for KRONOS, OASYS, M3, & K-M50: http://www.karma-lab.com/sounds/catalyst1.html
CHEMISTRY 3, a Groove Injection for Your Karma: http://www.karma-lab.com/sounds/chem3.html
SoundCloud MP3 Demoshttps://soundcloud.com/ej2-sc

sparkie · Posted: Sun Aug 19, 2007 3:32 am Post subject:

On the 3rd demo about half way through, Rich talks about saving a wave file to the USB stick by pressing the record and start/stop buttons and playing back the sequence. He then pulls out his USB stick from the back and says it is auto saved or shows you can save it to the disc using USB.. I dont understand, as when I do it I dont have a file name to save there and nothing gets saved on my USB drive. Does it have to be a USB stick? I cant seem to find the wav to save it? The tracks seem to be empty or something but the sequence does play back OK and was saved in memory. Has anyone else tried this?
Sparkie

RichF · Posted: Wed Aug 29, 2007 7:43 am Post subject:

Hi all, thanks very much for the comments! I gotta fix my posture in these clinics... I might as well be calling for sanctuary in the bell tower.

Sparkie, I was talking about using the "2ch mix to media" functionality in the sampler.

Here's how you use that little shortcut:

1. Make sure your USB drive is recognized by the M3. Go to Media mode, touch the Media Info tab, then select "Scan USB Device" from the drop-down menu in the upper-right.

2. When you're done making the song in SEQ mode, touch the "Sampling AudioIn" tab, and from the drop-down menu, select "Auto Sampling Setup" (you'll have to scroll to the right).

3. On the screen that comes up, select "2ch Mix to Media." This option will be grayed out if the M3 doesn't see your storage device. Note that this is also the screen where you can select "In-Track Sampling," where the M3 can record audio into the sequencer!

4. Press the SAMPLING REC button (not the sequencer REC/WRITE button). It should blink for a second or two. When it stops, press the SAMPLING START/STOP button right next to it.

5. Play the song back using the sequencer START/STOP button, and let it play all the way through. When it's finished, press the sequencer START/STOP button again, and it will automatically stop the sampler along with it.

6. Go to Media mode, and check out your USB drive... there should be a stereo WAV file there, beginning with the word TAKE.

If you skip steps 2 and 3, the audio gets saved to RAM, not to the USB media. I hope this fixes your problem!

I gotta remember to tell my mom she can find me on YouTube now... I know for a FACT I'll hear about my posture from her...
_________________
Richard Formidoni

sparkie · Posted: Thu Aug 30, 2007 4:12 am Post subject:

sparkie · Posted: Fri Aug 31, 2007 3:59 am Post subject:

Great..got it to work..Although now my bus inputs are being turned off..after I have them set at L/R. I also tried writing the global setting but after I saved the wav file the BUs Selects were back to the setting of "Off".

How can I also include and wav record my rack synth along with the M3 in the sequence?? The buses are being turned off and only the M3 is being recorded.
Sparkie

sparkie · Posted: Tue Sep 11, 2007 3:50 am Post subject:

I guess Rich must be busy!!
Sparkie

bkboy · Full Member Joined: 18 Jan 2007 Posts: 115

good video, but awful sound quality. sam ash could have done better

Jon Lord · Posted: Fri Oct 05, 2007 7:37 pm Post subject:

--Radias Exb Sounds--
I recorded some stuff to share with those who doesn't have the opportunity to test the Radias Exb for the Korg M3.

http://www.youtube.com/watch?v=GiyAEgDQKsE
There you will also find a download link to download the original "wav" files for those who needs those Wink

/Jon Lord
_________________

- Download & share Korg keyboard patches for free.
Korg M3-73 (Radias Exb & Warwick "RC 21728 B" case), Clavia Nord Electro 3.
[On Hold]: Elka MK-88. [Sold]: Roland XP-30, Access Virus C

Westnik · Posted: Sat Oct 06, 2007 9:44 am Post subject:

Good work, Jon Lord! I also like pad F043- Everest. It is beautiful. Epic scene F001 is not bad.

Nevertheless, I think EXB-Radias does not have good lead sound (just "duck quack"). Too few presets, absence of Radias Combi.

sparkie · Posted: Sat Oct 06, 2007 2:15 pm Post subject:

Nice work Jon...A++