Very New M3 & Tech User Needs Help

Discussion relating to the Korg M3 Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
Furn
Posts: 1
Joined: Sat Oct 20, 2007 10:14 pm
Location: Australia

Very New M3 & Tech User Needs Help

Post by Furn »

Hi All,
I am a late in life starter on the whole tech/computer music. I use finale 2008 for composition & arranging and have just bought a Korg M3.

Can anyone help me with setting up Finale & the M3. I can get sounds in finale playback (through the M3) in combi mode but voices are mixed up.

If I go to seq mode only one voice comes through.

Also I cant get all the voices to show in finale.

Sorry if I sound like a complete idio but I am trying to step into this new age of music production:)
User avatar
MartinHines
Platinum Member
Posts: 3041
Joined: Tue Jan 21, 2003 12:56 pm
Location: Topeka, KS (USA)

Post by MartinHines »

I only know a little about Finale, but here goes:

1) If you want to be able to play up to 16 M3 sounds at the same time you need to put the M3 in Sequencer mode. Also, each M3 Sequencer Track would need to be set to a different midi channel (e.g. Track 1 to Midi Channel 1, Track 2 to Midi Channel 1, ... Track 16 to Midi channel 16).

2) There would be two options for using the M3 as a sound generator. The best would be to use the "regular" M3 sounds (the non-GM programs), and the second would be to set the M3 to use GM sounds.

3) You will probably have to create a Custom Finale "Instrument List" (or Instrument Defintions) [this is a little confusing to me]

To do this, you will probably also need to set the M3's "Bank Map" setting correctly, and use the associated cc0 (Bank Select 0) and cc32 (Bank Select 32) values to enable Finale to send the correct messages to switch the M3 to the appropriate programs. Alternatively, you could just manually set the programs in the m3 in Sequencer Mode then make sure Finale was sending data to the correct midi channel.
Post Reply

Return to “Korg M3”