View previous topic :: View next topic |
Author |
Message |
Moondancer
Joined: 02 Dec 2007 Posts: 3
|
Posted: Sun Dec 02, 2007 11:44 pm Post subject: Assignable Switch not working @ X50 |
|
|
Hi folks!
I purchased a X50 last week, but now i've got a problem:
I tried to assign a switch to change programs etc., but the X50 just doesn't want to recognize it...
The polarity of the switch is a closer (we say it like this in german.. it closes the circuit. d'oh), but anyway I tried with both polarities, it just wont work.
The switch is a YAMAHA, but works perfectly as a sustain...
Any help is appreciated!
Nick |
|
Back to top |
|
|
asdasd Full Member
Joined: 02 May 2006 Posts: 215
|
Posted: Mon Dec 03, 2007 1:21 pm Post subject: |
|
|
Did you put it to right jack? Is is assigned correctly in global menu? did you install the pedal before turning X50 on?
Have to say it's strange cause, mine works even though it basicly says "not for korg". |
|
Back to top |
|
|
Moondancer
Joined: 02 Dec 2007 Posts: 3
|
Posted: Mon Dec 03, 2007 1:29 pm Post subject: |
|
|
Jack is the right one and the assignment should be correct as well...
With the installing before turning on, I don't see, what you mean... |
|
Back to top |
|
|
asdasd Full Member
Joined: 02 May 2006 Posts: 215
|
Posted: Tue Dec 04, 2007 2:10 pm Post subject: |
|
|
I mean first plug the pedal and then turn on.. And is it calibrated?
If not go to global menu pedal page > Utlity button > calibrate...
And read the manual there is probably more there... but it should work. Try if the sustain works first if it works, then you can get it to work for sure. |
|
Back to top |
|
|
|