View previous topic :: View next topic |
Author |
Message |
4NDRW Full Member
Joined: 18 Dec 2007 Posts: 158 Location: melbourne, australia
|
Posted: Mon Feb 04, 2008 6:14 pm Post subject: not many utilities on micro-x |
|
|
EDIT:
asdasd wrote: | X50 can, are you sure that you are in the FX page when you hit the utility?
It does not work any other way. |
on my karma there are heaps of options under utilities
that seem to have been stripped out in the micro-x os
namely... copy from prog when in multi mode (or seq on the karma)
you can copy from combi...
but i want to get a program, with all the effects set up for it
thinking about using multi mode instead of combi live
i need 2 different controller keyboards, playing different patches off the micro-x simultaniously
and then scrolling through saved multi setups live
then i dont have to overwrite any existing combi's....
or am i making things more difficult than it has to be?
(also just noticed that copy from prog is also missing in combi mode too....)
such a little thing, but saves me so much time _________________ Harpy.com.au
Last edited by 4NDRW on Wed Mar 19, 2008 4:35 am; edited 1 time in total |
|
Back to top |
|
|
4NDRW Full Member
Joined: 18 Dec 2007 Posts: 158 Location: melbourne, australia
|
Posted: Mon Feb 04, 2008 6:16 pm Post subject: |
|
|
i forgot about the software editor... i assume that would be the easiest way to copy programs to combis/multi's
sorry if this lacks a point, i'm thinking and typing at 5 in the morning, haha
i think i'll try it after work. _________________ Harpy.com.au |
|
Back to top |
|
|
BONES Full Member
Joined: 20 Jul 2006 Posts: 173 Location: Sydney, Australia
|
Posted: Tue Feb 05, 2008 3:27 am Post subject: |
|
|
What's the big deal about overwriting existing patches? Surely there are dozens that you know you will never use? I put all the programs I thought I might use in one place and it almost fills one bank [118]. Everything else can be overwritten without any issues for me. And there are only one or two combinations I might want to keep, purely as inspiration for making my own. _________________ http://www.novakill.com
http://www.myspace.com/novakill |
|
Back to top |
|
|
4NDRW Full Member
Joined: 18 Dec 2007 Posts: 158 Location: melbourne, australia
|
Posted: Thu Feb 07, 2008 2:57 pm Post subject: |
|
|
yeh i'm just jumping in and overwriting s**t now.
but yeh, i'm using the software editor, and i still cant see an easy way to copy from programs to a combi.
so i'm having to set up the fx section manually parameter by parameter
f'ing painful!
(specially for something simple that could be done in about 3 button presses on my karma) _________________ Harpy.com.au |
|
Back to top |
|
|
BONES Full Member
Joined: 20 Jul 2006 Posts: 173 Location: Sydney, Australia
|
|
Back to top |
|
|
Voltan Senior Member
Joined: 02 Nov 2007 Posts: 370 Location: Poland
|
Posted: Fri Feb 08, 2008 10:06 pm Post subject: |
|
|
Triton LE can't do that either |
|
Back to top |
|
|
asdasd Full Member
Joined: 02 May 2006 Posts: 215
|
Posted: Sun Feb 10, 2008 9:51 am Post subject: |
|
|
X50 can, are you sure that you are in the FX page when you hit the utility?
It does not work any other way. |
|
Back to top |
|
|
4NDRW Full Member
Joined: 18 Dec 2007 Posts: 158 Location: melbourne, australia
|
Posted: Mon Feb 11, 2008 2:19 am Post subject: |
|
|
asdasd wrote: | X50 can, are you sure that you are in the FX page when you hit the utility?
It does not work any other way. |
thanks for this, didn't think of trying that
really should read that manual eh?
didn't bother because its so similar to the karma...
but then i think i only skim read that, 2 years ago.
i'll give this a try, when i next see my micro-x
should be tonite. _________________ Harpy.com.au |
|
Back to top |
|
|
4NDRW Full Member
Joined: 18 Dec 2007 Posts: 158 Location: melbourne, australia
|
Posted: Tue Feb 12, 2008 6:21 pm Post subject: |
|
|
you are quite correct!
thanks alot! _________________ Harpy.com.au |
|
Back to top |
|
|
|