Korg Forums

Cutter · Posted: Mon Feb 16, 2009 4:44 pm Post subject: change octave

How or where do you change octaves? Many keyboards have dedicated buttons, some have buttons to transpose or change the key.
Does the M50 do that if so where?
_________________
N364

past KorgDW8000/ KorgX2 / Korg N-88/Alesis Q6/ Alesis Q8

FifthElement · Posted: Mon Feb 16, 2009 5:37 pm Post subject:

You can assign SW1 and SW2 to either OCTup or OCTdown within a patch.
_________________
Korg M50-88, Nord Electro2 73, Roland JV-90

Fender Strat Plus Deluxe, Ibanez MESA, Line6 Variax, Line6 POD 2.0

Cutter · Posted: Mon Feb 16, 2009 7:40 pm Post subject:

ok, so then you can't do that on the fly though. That would be a helpful funtion for the 61 key
_________________
N364

past KorgDW8000/ KorgX2 / Korg N-88/Alesis Q6/ Alesis Q8

StudioMan · Posted: Mon Feb 16, 2009 7:43 pm Post subject:

What he means, is you setup the program or Combi with SW1 or 2 for the Octave up or down, then it's on the fly.

Mike

Cutter · Posted: Tue Feb 17, 2009 6:25 pm Post subject:

Ok, if I were to do that then those are limited to that funtion right? Is there another common program use for those buttons? If not that might be an easy answer.
_________________
N364

past KorgDW8000/ KorgX2 / Korg N-88/Alesis Q6/ Alesis Q8

kanthos · Posted: Tue Feb 17, 2009 6:56 pm Post subject:

SW1 and SW2 are used for different things in different patches; there's no way to globally assign them.
_________________
Keyboard Rig: Korg Kronos, Moog Sub 37, Waldorf Blofeld Module, Neo Instruments Ventilator II, Moog MiniFooger Delay, Strymon BigSky, Roland KC-150, Mackie 802-VLZ4 Mixer