Korg Forums

MarkoX50 · Joined: 03 Feb 2009 Posts: 30

I have problem with m3,because I dont know to make good combi for brass section.My ex korg TR sounds better! I want to make something like oktav 3 brass on korg triton extreme!!! please help Crying or Very sad

maxipf · Joined: 19 Nov 2008 Posts: 14

+1.
Max

Sharp · Posted: Thu Oct 15, 2009 11:32 am Post subject:

The best advice I have give you is to go to program mode and go through the brass sounds and write down the location of each sound that you like most. Then when you have a list, go back to COMBI mode and assign them one by one into a blank COMBI.

Set all the midi channels of the COMBI to Track 1 as necessary so you can actually hear the sounds assigned play when you press the keys.

Also make heavy usage of the Pan and spread out your sounds.

Finally, use a slight bit of Chorus on MFX 1 and a Smooth Hall Reverb on MFX 2. IF you need a little more sparkle to the sound, apply a stereo enhancer to IFX 1.

Regards
Sharp
_________________

MarkoX50 · Joined: 03 Feb 2009 Posts: 30

I did this few days ago,and I am not supprised of resault Sad

Can someone tell me what does he used in his brass combi?
Sorry because my English is bad,and I hope you understood me Wink

EvilDragon · Posted: Thu Oct 15, 2009 5:44 pm Post subject:

The way Sharp said it is the most common way to do brass sections. To do it better you'd probably have to know the ranges of each particular brass instrument, and set key windows according to that, and stuff like that.

Not easy, but you need to tweak more. You can't expect instant solution just about anytime unfortunately Sad