View previous topic :: View next topic |
Author |
Message |
Sharp Site Admin
Joined: 02 Jan 2002 Posts: 18197 Location: Ireland
|
Posted: Mon Mar 15, 2004 1:28 am Post subject: Tip: Creating the perfect Multisample extremely fast. |
|
|
Hi all.
Going by the book, a perfect and evenly sampled Multisample will have 13 samples.
Each sample within the multisample will be streached up and down 2 semitones from the original note.
What most people don’t realise is that the Triton can actually tell you what notes to sample, and it will even write the correct settings into the Multisample automatically for you.
Providing that is you do this….
Go to Sampling Mode, and select a memory location where you would like to create your new Multisample.
Press the Menu button and go to page 3 “Multisample”.
Select the Preference tab from the bottom of the screen.
Enter in the following settings.
Position = Right
Zone Range = 5 Keys
Original Key Position = Center
Now press the Exit button to return to the Sampling Page.
Make sure that the “Origkey” is set to C2
And change the Top Key Value to D2.
From now on the Triton will enter in all the correct settings all on it’s own.
All you have to do now is sample the “Origkey” that’s displayed on the screen.
So sample the C2 note. Once you sampled that, press “Create”. The Triton will automatically tell you what note to sample next (the OrigKey), and again after you have sampled that note, press create.
Keep going until you have created 13 samples.
You do not have to touch any other settings. The Triton will automatically setup the Multisample perfectly so that each “OrigKey” sample will be stretched up and down by 2 semitones.
Regards.
Sharp. _________________
|
|
Back to top |
|
|
DA RIPPER Junior Member
Joined: 01 Sep 2003 Posts: 70 Location: GAINESVILLE,FLA
|
Posted: Mon Mar 15, 2004 7:42 am Post subject: |
|
|
once again good look out sharp!!!!!!1 |
|
Back to top |
|
|
chordial Platinum Member
Joined: 27 Jan 2002 Posts: 3385 Location: UK
|
Posted: Mon Mar 15, 2004 7:41 pm Post subject: |
|
|
Good advice, thanks _________________ Chordial |
|
Back to top |
|
|
McHale Guest
|
Posted: Mon Mar 15, 2004 10:53 pm Post subject: |
|
|
this works in the Classic as well.
Sharp. Has much changed from the classic to the studio (and even the eXtreme) as far as programming patches and sampler stuff?
-Mc |
|
Back to top |
|
|
justin_nys Junior Member
Joined: 21 Oct 2003 Posts: 71 Location: Malaysia
|
Posted: Mon Apr 26, 2004 7:07 am Post subject: |
|
|
Thanks for the tips shapr! and I got a question here!
i've used the method above and succesfully sampled a Piano/EP sound from my Yamaha keyboard...i'm done with with all the sample editing and converted it to a program...but there's one problem...i can't control the velocity and the after touch thing...no matter how hard or soft i press the key the volume is still the same...can't play softer or play with dynamics...can someone give me a hand on this?
and what effects should i put in a Piano/EP to spice it up..any recommendations? thanks |
|
Back to top |
|
|
justin_nys Junior Member
Joined: 21 Oct 2003 Posts: 71 Location: Malaysia
|
Posted: Mon Apr 26, 2004 7:11 am Post subject: RE: Creating the perfect Multisample extremely fast. |
|
|
sharp wrote: | Hi all.
Going by the book, a perfect and evenly sampled Multisample will have 13 samples.
Each sample within the multisample will be streached up and down 2 semitones from the original note.
What most people don’t realise is that the Triton can actually tell you what notes to sample, and it will even write the correct settings into the Multisample automatically for you.
Providing that is you do this….
Go to Sampling Mode, and select a memory location where you would like to create your new Multisample.
Press the Menu button and go to page 3 “Multisample”.
Select the Preference tab from the bottom of the screen.
Enter in the following settings.
Position = Right
Zone Range = 5 Keys
Original Key Position = Center
Now press the Exit button to return to the Sampling Page.
Make sure that the “Origkey” is set to C2
And change the Top Key Value to D2.
From now on the Triton will enter in all the correct settings all on it’s own.
All you have to do now is sample the “Origkey” that’s displayed on the screen.
So sample the C2 note. Once you sampled that, press “Create”. The Triton will automatically tell you what note to sample next (the OrigKey), and again after you have sampled that note, press create.
Keep going until you have created 13 samples.
You do not have to touch any other settings. The Triton will automatically setup the Multisample perfectly so that each “OrigKey” sample will be stretched up and down by 2 semitones.
Regards.
Sharp. |
Thanks for the tips sharp! and guys I got a question here!
i've used the method above and succesfully sampled a Piano/EP sound from my Yamaha keyboard...i'm done with with all the sample editing and converted it to a program...but there's one problem...i can't control the velocity and the after touch thing...no matter how hard or soft i press the key the volume is still the same...can't play softer or play with dynamics...can someone give me a hand on this?
and what effects should i put in a Piano/EP to spice it up..any recommendations? thanks
P/S: I've posted this question in the classic thread...i just post here again coz it seems like this thread gets more replies... |
|
Back to top |
|
|
Sharp Site Admin
Joined: 02 Jan 2002 Posts: 18197 Location: Ireland
|
Posted: Mon Apr 26, 2004 3:50 pm Post subject: |
|
|
Hi.
Yeah, just edit the program by going to Page 4 (Edit – Amp).
Select the “Amp 1 mod” tab at the bottom of the page.
Adjust the Amp Modulation / Velocity Intensity to whatever setting suites your needs. I would suggest around +65.
If you created a double OSC program, you will have to switch over to “Amp 2 mod” page and do the same there. If it’s a single OSC program, then don’t worry, the option to edit “Amp 2 mod” will not be available.
Save your changes.
That it really.
Regards.
Sharp. _________________
|
|
Back to top |
|
|
justin_nys Junior Member
Joined: 21 Oct 2003 Posts: 71 Location: Malaysia
|
Posted: Mon Apr 26, 2004 6:54 pm Post subject: |
|
|
Thanks alot sharp |
|
Back to top |
|
|
|