Korg Forums

[nicky_p]

Hallo, I'm sorry that I'm bothering you with this , but I'm too worry . My M3 start to lowering the level of the sound when I play. It come back to normal level when I change to program and then back to combination . Can you explain to me if it's a OS problem or I have to look elsewhere! I've try to Re-install my OS 2.0.4 with the same but the M3 doesn't leave me to do that! Shall I recall somehow the factory settings I mean like to press few buttons and to reset the M3 ?
Thanks a lot in advance !

Regards Nikolay Tsvetkov (nicky_p)


p.s.
I connest the module MIDI to other synth and the problem exist !
_________________
KORG: PA4X -76; M3-73 EXB-RADIAS + EXB256; TRITON EXTREME 61 96MB; I-30; DW6000! ROLAND A-800 PRO; A-70; E-30; D10! YAMAHA: PSR A3; QY-300; MU90R! FENDER RHODES 54 AND FEW OTHER THINGS

[AlchemistMusicStudio]

[nicky_p]

It was already Expanded with 2.0 and then 2.0.4! I reset the M3 with ENTER+1+Power and then reload my PCG and SEQ and Samples. It continue to do the sound lowering . With switching freom COMBI->PROG->COMBI the problem disappear for unknown period !

It's really strange !!!

Thanks for the advice .


Regards Nikolay Tsvetkov (nicky_p)
_________________
KORG: PA4X -76; M3-73 EXB-RADIAS + EXB256; TRITON EXTREME 61 96MB; I-30; DW6000! ROLAND A-800 PRO; A-70; E-30; D10! YAMAHA: PSR A3; QY-300; MU90R! FENDER RHODES 54 AND FEW OTHER THINGS

[r12]

does it lower the level on all prog & combis or just one ?

is there something connected to midi in ?

have you the same problem on the headphones output ?

is the M3 main outputs connected to a mixer ?
_________________
YAMAHA W5 + TRITON proX (exb MOSS / exb PCM01 / exb PCM05 / exb SCSI / 64Mo) + M3-73 No.000187 v2.0 (exb Radias v2.0 / exb M256) + DOEPFER LMK2+
AKAI DPS16 + MINDPRINT Envoice + ART Dual MP + RODE NT1000
BEHRINGER DDX3216 + 4 MACKIE SRM350 + 2 MACKIE SWA1501 (+ PEAVEY KB300 )
...

[nicky_p]

Yes to all.
Lowering on all programs and combi
Is connected to my PC ( connected or no connected it does it)
It lowering the sound also on the headphone output
Yes I connect it to my Mixer ( also my Triton Extreme is connected and the sound is solid no change on TE)


Is OS issue I thing


Thanks !
_________________
KORG: PA4X -76; M3-73 EXB-RADIAS + EXB256; TRITON EXTREME 61 96MB; I-30; DW6000! ROLAND A-800 PRO; A-70; E-30; D10! YAMAHA: PSR A3; QY-300; MU90R! FENDER RHODES 54 AND FEW OTHER THINGS

[r12]

I'm not sure it's a software problem
have you tried aux outputs ?
_________________
YAMAHA W5 + TRITON proX (exb MOSS / exb PCM01 / exb PCM05 / exb SCSI / 64Mo) + M3-73 No.000187 v2.0 (exb Radias v2.0 / exb M256) + DOEPFER LMK2+
AKAI DPS16 + MINDPRINT Envoice + ART Dual MP + RODE NT1000
BEHRINGER DDX3216 + 4 MACKIE SRM350 + 2 MACKIE SWA1501 (+ PEAVEY KB300 )
...

[m3styles]

What do you mean with "lowering the level"? Does sound level go from normal to lower gradually or instantly? Is this lower value always the same or even zero? Do you also hear any sound changes (filter, distorsion...)? In this case maybe ribbon controller might be stuck...

Have you already reloaded a system? Did you try to unconnect M3 from a computer and all controllers?

[nicky_p]

Yes to disconnected the unit

yes - it is about half level down

No - dist-filter and so on!


I attached expression pedal and is gone, it might be the Jack connection ( Hardware)

Thank's


I'll try to repair the unit and let you know what it were

Thank you for all those suggestions
_________________
KORG: PA4X -76; M3-73 EXB-RADIAS + EXB256; TRITON EXTREME 61 96MB; I-30; DW6000! ROLAND A-800 PRO; A-70; E-30; D10! YAMAHA: PSR A3; QY-300; MU90R! FENDER RHODES 54 AND FEW OTHER THINGS