|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Thu Dec 27, 2018 6:35 pm Post subject: In part solved |
|
|
Hello everyone, after various tests I partly solved the configuration thanks to the information received from a post by Karmathanever, where he explained the various steps to insert a syx file inside the FCB1010.
I was able to configure the various fill in and the variations assigning them to the various pedals, I was unable to configure the expression pedals, I tried various parameters (the program change / control change volumes are 7 and 11) but nothing, do not work or they have no effect, I'm definitely missing something ... but I do not know what.
For now I can use it partially and I'm happy waiting for someone to give me more information on how to solve the last problem.
Thank you all |
|
Back to top |
|
|
Nemik Approved Merchant
Joined: 27 Jan 2014 Posts: 1725 Location: Hilton Head Island, SC
|
Posted: Fri Dec 28, 2018 1:02 am Post subject: |
|
|
@francopiano
In FCB1010 Variations, Fills, Ending and Break is controlled by PC (program Change), which has to by set in global (PC) on same MIDI number channel as on Korg MIDI IN channel (control).
Here is all available PC on Korg:
https://performersheaven.com/en/midi-en/pc-in-korg-pa-en
Track Volume is controlled via CC ( Control Change) and must be on different channel that PC.
Here is list all CC on Korg:
https://performersheaven.com/en/midi-en/midi-control-change-korg-pa-en
Depend on what (which track) you want to control on Korg, you need match same MIDI channel on both, Korg and FCB1010.
Let say you want control Volume (7) Upper1 on Exp A.
1. in global FCB1010 set Midi channel to #3 for Exp A.
2. In Midi IN set you channel 3 to Upper1.
3. Very Important !!
FCB1010 can have 10 different setting on Exp A & B, means if you wanna on Exp A only Volume Upper1 sounds, you must set this under all 10 buttons, same setting on all.
If not, if you set only under button 1, when you press button 2, you be not available to control Volume any more.
As you see on this chart (picture) each button has place to set Exp A & B.
I did explain this on my website:
https://performersheaven.com/en/resources-en/how-to-en/programming-fcb1010-en
Also I made Video with Closed Caption which you can read with your language.
On YouTube Video, turn on CC, go to setting and set Auto Translate, then set your language (Italian).
https://www.youtube.com/watch?v=2hOSKV0eT90
If you still have question, please ask,... we are here to help.
_________________ Nemik
Korg Kronos2-61, Korg Pa600, Novation UltraNova, Akai Professional MPK49, Akai Professional MPK225 , Alesis QX-49, APC25 Keys, Launchpad MK2, Korg nanoPad2
MOTU Midi Express XT, FCB1010 with UnO, Behringer X2222 USB, TASCAM Model 24 Mixer, Presonus AudioBox96, M-Track Plus
Fl Studio 21, Ableton Live 10 Suite.
Korg Pa5x Sounds at Performers Heaven |
|
Back to top |
|
|
siebenhirter Platinum Member
Joined: 13 Oct 2011 Posts: 1844
|
Posted: Fri Dec 28, 2018 10:03 am Post subject: cc#06 + cc#38 = value of sb-entry |
|
|
Found an error in your last message of your table. If you send NRPN to set sb-entries you not only need coarse-value CC#06 (for hundreds) but also fine-value CC#38 to build full sb-entry number with 4 digits. _________________ kind regards
- siebenhirter, austria -
Interesting facts about styles and stylePlayer functions can be found at http: www.elmarherz.de |
|
Back to top |
|
|
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Fri Dec 28, 2018 11:46 am Post subject: Yeahhhh |
|
|
Thank you Nemik, now work!!!!! im very happy receive help from you, thank you a lot really.
I will show you how i set in the software all parametersbut don't know how do for add pics into a message. |
|
Back to top |
|
|
Nemik Approved Merchant
Joined: 27 Jan 2014 Posts: 1725 Location: Hilton Head Island, SC
|
Posted: Fri Dec 28, 2018 12:42 pm Post subject: Re: cc#06 + cc#38 = value of sb-entry |
|
|
siebenhirter wrote: |
Found an error in your last message of your table. If you send NRPN to set sb-entries you not only need coarse-value CC#06 (for hundreds) but also fine-value CC#38 to build full sb-entry number with 4 digits. |
Tnx to point out, I fixed _________________ Nemik
Korg Kronos2-61, Korg Pa600, Novation UltraNova, Akai Professional MPK49, Akai Professional MPK225 , Alesis QX-49, APC25 Keys, Launchpad MK2, Korg nanoPad2
MOTU Midi Express XT, FCB1010 with UnO, Behringer X2222 USB, TASCAM Model 24 Mixer, Presonus AudioBox96, M-Track Plus
Fl Studio 21, Ableton Live 10 Suite.
Korg Pa5x Sounds at Performers Heaven |
|
Back to top |
|
|
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Fri Dec 28, 2018 1:06 pm Post subject: |
|
|
Hi Nemik, with your suggest i set fcb1010 ', but after use expression/volume pedal i discover that control when press all give volume, when press partial nothing, and when no press.... nothing (normal)so by partially pressing the pedal I have no change, only when I completely press the volume, it seems that I have no incremental control, is this normal? |
|
Back to top |
|
|
Nemik Approved Merchant
Joined: 27 Jan 2014 Posts: 1725 Location: Hilton Head Island, SC
|
Posted: Sat Dec 29, 2018 12:23 am Post subject: |
|
|
francopiano wrote: | Hi Nemik, with your suggest i set fcb1010 ', but after use expression/volume pedal i discover that control when press all give volume, when press partial nothing, and when no press.... nothing (normal)so by partially pressing the pedal I have no change, only when I completely press the volume, it seems that I have no incremental control, is this normal? |
No, is not normal, Expression works on any position, means if you press 50%, should sent 50% of value set between low and high point. (if 0-127, is sending 64).
Is a free software called MIDI-OX, you can download and check any Midi device what message is sending.
http://www.midiox.com/ _________________ Nemik
Korg Kronos2-61, Korg Pa600, Novation UltraNova, Akai Professional MPK49, Akai Professional MPK225 , Alesis QX-49, APC25 Keys, Launchpad MK2, Korg nanoPad2
MOTU Midi Express XT, FCB1010 with UnO, Behringer X2222 USB, TASCAM Model 24 Mixer, Presonus AudioBox96, M-Track Plus
Fl Studio 21, Ableton Live 10 Suite.
Korg Pa5x Sounds at Performers Heaven |
|
Back to top |
|
|
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Sat Dec 29, 2018 7:12 am Post subject: |
|
|
Thank you Nemik for a fast response, i will say you how i set the CC's and the Expression pedals, that for all presents
------CC----Value -------------- Controller--Minimum--Maximum
1------ 4------ 1 ----------------- 7 ------- 0 ---------127
2------ 7------ 0 ----------------- 7 ------- 0 --------127
in the global setting page i set
CC1 Channel 7
CC2 Channel 7
EXp A Channel 3
EXp B Channel 4
in Korg midi page i set
channel 3 upper1
channel 4 upper2
channel 7 control
mean this is all right, but result is pedal A work only how say you in last post, pedal B not work.
Hope all this can help you to found a solution of my problem....howewer today try use MIDIOX for check what signal get out pedal A when i press it.
Thank you for now. |
|
Back to top |
|
|
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Wed Jan 02, 2019 1:27 pm Post subject: |
|
|
Hi all, After doing a calibration of the A and B pedals things are slightly improved, the pedals start running at 3/4 of the race, but they are inefficient to be able to make a serious modulation of the sound ... unfortunately, I do not know what else to do, maybe that the pedal is defective ?, I also carried out a test with Midi-Ox, if I press the pedal at the bottom quickly generates 5-6 lines of codes, if I press it slowly generates at least 30 .... but I can not interpret the values. |
|
Back to top |
|
|
Nemik Approved Merchant
Joined: 27 Jan 2014 Posts: 1725 Location: Hilton Head Island, SC
|
Posted: Thu Jan 03, 2019 1:48 am Post subject: |
|
|
francopiano wrote: | Hi all, After doing a calibration of the A and B pedals things are slightly improved, the pedals start running at 3/4 of the race, but they are inefficient to be able to make a serious modulation of the sound ... unfortunately, I do not know what else to do, maybe that the pedal is defective ?, I also carried out a test with Midi-Ox, if I press the pedal at the bottom quickly generates 5-6 lines of codes, if I press it slowly generates at least 30 .... but I can not interpret the values. |
FCB1010 has optical sensor on Expression pedals.
Maybe is dirty and required some cleaning? _________________ Nemik
Korg Kronos2-61, Korg Pa600, Novation UltraNova, Akai Professional MPK49, Akai Professional MPK225 , Alesis QX-49, APC25 Keys, Launchpad MK2, Korg nanoPad2
MOTU Midi Express XT, FCB1010 with UnO, Behringer X2222 USB, TASCAM Model 24 Mixer, Presonus AudioBox96, M-Track Plus
Fl Studio 21, Ableton Live 10 Suite.
Korg Pa5x Sounds at Performers Heaven |
|
Back to top |
|
|
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Thu Jan 03, 2019 10:22 am Post subject: |
|
|
Hi Nemik, FCB it's new, my son gift to me for Christmas, mean impossible dirty, and surely i can't open when in warranty,but can try contact vendor for have a solution's, other can't do.
I will thank you for help give me for set it.
Thank you very much. |
|
Back to top |
|
|
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Mon Jan 07, 2019 5:44 pm Post subject: |
|
|
Hello Nemik, I contacted the seller and illustrated the problem, he then asked me to send him the FCB pedals and sends me another new one, hopefully this is 100% working, I'll update you as soon as I get there. |
|
Back to top |
|
|
francopiano
Joined: 02 Jun 2009 Posts: 31 Location: italy
|
Posted: Tue Jan 15, 2019 6:23 pm Post subject: |
|
|
today I received the pedal to replace the defective one and now the expression pedal works perfectly, so the problem is solved.
Now I have a question about the possibility of using one of the two expression pedals to adjust the simulation of the Leslie effect, could you tell me which settings should I use for this use?
Thank you in advance |
|
Back to top |
|
|
Alosi
Joined: 15 Nov 2017 Posts: 22
|
Posted: Sun Apr 28, 2019 10:52 am Post subject: FCB1010 |
|
|
Hello, thanks to your advice I programmed my FCB 1010. But I would like that the pedal A controls the Master volume and not only upper 1 as I programmed it. for that I can configure the pedal A in the channel control that I chose in Midi Function? Excuse my English Google Translation. Thank you |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|