|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
Shutoku Full Member
Joined: 17 Aug 2008 Posts: 143
|
Posted: Thu May 07, 2015 8:45 pm Post subject: hooking a usb keyboard controller up to the Kross? |
|
|
Probably there is an adaptor of some sort, but I have an m-audio keyrig 49.
For those unfamiliar it is a pretty basic controller with pitch and mod wheels, a volume slider, octave switches, and an "edit mode" button. It draws power from the computer it is plugged into.
Is there as way to wire it to the Kross and if so how would one determine the midi channel it is sending on? _________________ Stage: Korg Krome 88
Home: above plus Korg Kross 61, Korg m1, original Korg Mono/poly, Yamaha Reface CS, Yamaha KX-5 |
|
Back to top |
|
|
castorex Full Member
Joined: 06 Jun 2014 Posts: 134
|
Posted: Fri May 08, 2015 5:01 am Post subject: |
|
|
You need this kind of product: USB Host to MIDI converter
This i a very expensive module (very complex converter in this way).
And you need to find a solution for the power supply...
Expensive and complex... with the risk that it does not work well ! |
|
Back to top |
|
|
Bald Eagle Platinum Member
Joined: 25 Jan 2009 Posts: 2278 Location: Long Island, NY
|
Posted: Fri May 08, 2015 12:31 pm Post subject: |
|
|
This should work ... iConnectMIDI4
A bit on the expensive side but quite flexible and lots of room for future expansion. |
|
Back to top |
|
|
Shutoku Full Member
Joined: 17 Aug 2008 Posts: 143
|
Posted: Sat May 09, 2015 1:44 am Post subject: |
|
|
Yeah I was afraid of that. If I had no other options for a controller maybe, but I do so that price range makes it a firm "no"
Thanks for the info though, I appreciate it! _________________ Stage: Korg Krome 88
Home: above plus Korg Kross 61, Korg m1, original Korg Mono/poly, Yamaha Reface CS, Yamaha KX-5 |
|
Back to top |
|
|
jobro
Joined: 26 May 2009 Posts: 18
|
Posted: Wed Aug 05, 2015 2:23 pm Post subject: |
|
|
Now I don't know how old your computer is, but wouldn't it be simpler to connect both Kross and Keyrig to your puter, assign different MIDI ports to them, set the Keyrig to play say MIDI channel 2 on Kross, from within your DAW. Isn't this better and cheaper in the long run? |
|
Back to top |
|
|
Shutoku Full Member
Joined: 17 Aug 2008 Posts: 143
|
Posted: Wed Aug 05, 2015 7:08 pm Post subject: |
|
|
Maybe, but the point was to add an already owned controller to the Kross for live applications. If I'm bringing a computer, the rig just got considerably more complex. For home use sure, but not live. _________________ Stage: Korg Krome 88
Home: above plus Korg Kross 61, Korg m1, original Korg Mono/poly, Yamaha Reface CS, Yamaha KX-5 |
|
Back to top |
|
|
Dragan Full Member
Joined: 03 Nov 2015 Posts: 103 Location: Ljubljana, Slovenia
|
Posted: Mon Nov 09, 2015 8:41 pm Post subject: |
|
|
I have a similar M-Audio 49 controller keyboard as mentioned. I do not understand what benefit do you expect by hooking up 49-keys to a 61-key synth? _________________ VOLCA Keys+Bass+Beats
ELECTRIBE 2
KROSS 88
|
|
Back to top |
|
|
aron Platinum Member
Joined: 27 Jan 2011 Posts: 1547 Location: Hawaii
|
Posted: Mon Nov 09, 2015 10:01 pm Post subject: |
|
|
I assume so he can have 2 keybeds to trigger sounds. _________________ Korg Kronos, CASIO PX-5S, Yamaha VL1, author of unrealBook for iPad. |
|
Back to top |
|
|
Dragan Full Member
Joined: 03 Nov 2015 Posts: 103 Location: Ljubljana, Slovenia
|
Posted: Tue Nov 10, 2015 8:29 am Post subject: |
|
|
aron wrote: | I assume so he can have 2 keybeds to trigger sounds. |
Hey Aron,
I enjoy reading your posts! You mean it is possible to add a MIDI keyboard to the Kross and assign another instrument to it? Is that even possible? Haven't thought of that.
Cheers,
D _________________ VOLCA Keys+Bass+Beats
ELECTRIBE 2
KROSS 88
|
|
Back to top |
|
|
aron Platinum Member
Joined: 27 Jan 2011 Posts: 1547 Location: Hawaii
|
Posted: Tue Nov 10, 2015 10:20 am Post subject: |
|
|
I'm not sure if it is possible. I just assumed that's what the OP wanted. It IS possible to do this via the standard MIDI ports, but not sure with the USB connector. _________________ Korg Kronos, CASIO PX-5S, Yamaha VL1, author of unrealBook for iPad. |
|
Back to top |
|
|
Asleep By Dawn Junior Member
Joined: 06 Mar 2015 Posts: 53 Location: Here
|
Posted: Sun Feb 28, 2016 8:05 pm Post subject: |
|
|
I have controlled a ms2000 with kross so I imagine the reverse is possible with just two midi cords n some setup _________________ Mwahahahaha!!! |
|
Back to top |
|
|
DeltaJockey Senior Member
Joined: 27 Jul 2015 Posts: 303 Location: East Gippsland, Australia
|
Posted: Thu Mar 17, 2016 10:31 pm Post subject: |
|
|
I just happened to notice this post.
It can be done easily, but it depends on the ports the cheap controller has I think.
I have a Nektar Impact LX88 controller, which is a full 88 keys, but only semi weighted. It is very light for an 88 key though.
Just as an experiment, I used it to play the piano on my Kross 61,
The Nektar, like many controllers gets its power from USB, but it also has a standard MIDI 5 pin DIN port.
So, I MIDI'd it DIN to DIN to the Kross, and then I got a USB plug pack and USB powered the Nektar controller. It worked perfectly. My next step will be to see if I can map the controllers on the Nektar to parameters on the Kross. Should in theory work.
It would give me a Kross 61 with workstation sliders and controls!
Anyway, not sure if this adds any ideas for you, but for me, adding the lightweight controller to the Kross 61, definitely gives me some flexibility when it comes to piano, and portabilty.
Chris _________________ The companions I can't live without: Kawai Acoustic Grand, Kawai MP11SE, Yamaha Montage8, Korg D1
Other important stuff: Kronos2-73, Studiologic NC2X, NI Komplete Ultimate 11, Sonuscore Elysion and Orchestra, Pianoteq, Experimenta Due. |
|
Back to top |
|
|
Shutoku Full Member
Joined: 17 Aug 2008 Posts: 143
|
Posted: Mon Mar 21, 2016 4:18 am Post subject: |
|
|
Dragan wrote: | aron wrote: | I assume so he can have 2 keybeds to trigger sounds. |
Hey Aron,
I enjoy reading your posts! You mean it is possible to add a MIDI keyboard to the Kross and assign another instrument to it? Is that even possible? Haven't thought of that.
Cheers,
D |
That was indeed the reason.
I routinely do this. In fact at one point I had a midi merger so I could run my digital piano and old M1 as controllers and the Kross supplying all the sounds, and of course also functioning as a keyboard.
I was doing this primarily for pretty complex material like Rick Wakeman solo stuff, and Yes and it allows me to have super flexible rig where I can without touching a button once the song starts, with splits and layers access a ton of sounds in real time.
The danger is loss of polyphony, but it only ever was an issue in one piece ("Arthur" from "The Myths and Legends of King Arthur and the Knights of the Round Table")
for more conventional gigging I still like to have a second controller, but I"m old and lazy, so I want light weight stuff. This is why I was interested in using the Keyrig 49. It is very light weight.
I solved the problem though by picking up a Yamaha reface CS synthesizer.
I use it as a synth, but I also midi it to the Kross, usually running piano and EP sounds from the kross keyboard, and hammond sounds from the CS keyboard. I have zero problems with the mini keys on the CS...in fact I LOVE that keyboard, so it works out really well. _________________ Stage: Korg Krome 88
Home: above plus Korg Kross 61, Korg m1, original Korg Mono/poly, Yamaha Reface CS, Yamaha KX-5 |
|
Back to top |
|
|
Greg_S
Joined: 12 May 2015 Posts: 2
|
Posted: Wed Mar 23, 2016 10:38 pm Post subject: |
|
|
Is it straight-forward to select programs or combis from a MIDI controller? And still be able to play the Kross as normal, and change sounds? |
|
Back to top |
|
|
aron Platinum Member
Joined: 27 Jan 2011 Posts: 1547 Location: Hawaii
|
Posted: Fri Mar 25, 2016 3:16 am Post subject: |
|
|
The problem is that you need to run in Combination mode if you want to be able to play 2 different sounds - one on the Kross and the other on the controller.
Just set the Kross to channel 1 and the controller to channel 2. Then setup your combinations so that the slots that you want to play with the Kross are assigned to channel 1. Then assign the slots for the controller on channel 2 for example.
It is also possible to send program changes with the controller to dial up sounds in the channel 2 slot(s). _________________ Korg Kronos, CASIO PX-5S, Yamaha VL1, author of unrealBook for iPad. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|