Korg Forums

musicsound wrote:Thanks - will do so

You may want to check this video. It's a screen replacement so you do not need to go that far, but it might be helpful to watch someone do it first.
Not sure if you would need to pull out the keybed..
https://www.youtube.com/watch?v=8Zbi1g2kync

Have fun~

+1 to all of You and Korg!

The fan is for the entire system. The KRONOS uses passive cooling so there must be some air flow inside the KRONOS to ensure it will work perfect under all temperature conditions. If this fan was placed there in order to cool the entire system (though I don't think so) , it's a design failure with ...

but this I really care is temperature measurements in my lab with external sensors on CPU & SMPS and temperature there had no noticeable increases

Oh you did measure temperature , I was thinking about the same. Thanks for sharing.

Thank you for information and sharing your experience Antony. Very helpful.
And as you say, very tempting!

My tip in that post for replacing factory SSD is only for advanced user who know what they're doing and primary based in cloning SSD method , that's why I said there "for anyone that intends to replace factory SSD". Thank you Antony. by the way, in your previously quoted post you mention no need ...

http://korgforums.com/forum/phpBB2/view ... hp?t=68128, most disk info is from last year, still might be relevant.
See also http://www.korgforums.com/forum/phpbb2/ ... hp?t=93589

You now have to Calibrate your KRONOS as the OS install does not contain that very important data. This is the first time I see the need to "calibrate" mentioned, so thank you for sharing. Technically I knew enough to go through method 1 or 2, but not knowing how to calibrate leaves me with option ...

Sharp wrote:Replacing the original drive is a very bad idea

Thank you Sharp, I'd be interested too to know what major concerns are.

these questions are answered in one of my tutorials Off topic here, but Qui, your tutorials are really good. They bridge the gap between param guide (useful, detailed, but lacking bigger picture view in some cases), and e.g. korg demo videos (good too, but skimming the surface). Thank you for ...

2)Are the effects within programmes that you choose to put into a combi automatically copied over with the programme? If not, how do you make this happen, or not, depending on what you require? I had a similar question. There was an interesting related discussion here http://www.korgforums.com ...

Great, thanks a lot, just ordered one :) Hi metallo, how did u go with the upgrade? I assume you are replacing original ssd, not adding second one? I am about to replace mine. I read past posts, and most were replacing with ~120gb. I think I saw posts about problems with 256gb. That's from 2013 ...

1. In my combi, I have a timbre that plays when KARMA is off, but does not play when it's ON. This, I don't know without looking at it. Perhaps it's related to the Timbre Thru setting on the KARMA GE Setup page. Yes it was related to Thru In Zone. Finally i understand this setting (param guide p ...

Hi all, I have 2 simple questions about Karma behaviuor. It's probably trivial and answer might be simple, but I could not get there. 1. In my combi, I have a timbre that plays when KARMA is off, but does not play when it's ON. That timbre is on Gch, "KARMA timbre off control" is set to Normal. I ...