Korg Forums

I could barely hear myself Could the audience hear you ? Some unlucky phasing ? was it the sound guy ? :wink: did the drumkit sound "swallow" the percussion sound ? first aid ? :arrow: Borrow an equalizer foot pedal from your guitarist and boost and EQ the WD signal . (and later ask him about ...

The WD does not have a balanced output but 2 normal unbalanced line outs. You connect them with 1 or 2 guitar cables (or similar) to your iDock. I recommend rectangular plugs on 1 end its safer for the WD plastic jacks ... The "balanced" iDock connection is for a microfone with an XLR plug , to keep ...

Preset 177 Acoustic Kit

<iframe width="560" height="315" src="http://www.youtube.com/embed/F1nb1GsitmE" frameborder="0"></iframe>

Review of the Global from MikeDolbear.com http://www.mikedolbear.com/story.asp?StoryID=3478 some thoughts about increased sensibility : Sensitivity appears to have also changed. As soon as I turned the Global on it was obvious that there had been tweaks in this department. However, more sensitive ...

a google search brings the following result :

<iframe width="560" height="315" src="http://www.youtube.com/embed/dHePryJ0m-c" frameborder="0"></iframe>

no misleading questions necessary
telefone call ... bingo

@ all ... thanx for posting ... good stuff

@ kaden
your link points to 1974
have you finally welded a time machine ?

wanna jump to 1966 ?
<iframe width="560" height="315" src="http://www.youtube.com/embed/YD2Xux7vVOU" frameborder="0"></iframe>

Headline of the original user manual "Know it , dont blow it" :lol: did you look at the schematics I have linked to ? :arrow: page 3/11 you find the DINs ... how much are you into reading schematics ? <table><tr><td><a href="http://ebookbrowse.com/korg-maxi-korg-800-dv-schematic-pdf-d3441348">Korg ...

so you want to send voltage ontop of an existing voltage ... not shure if that works . Main question : is this a CV signal input (e.g.for a stepsequencer) ??? or kind of an "ohmic insert" ? you shure have a dedicated knob for the filter function ? trace the cables that are soldered to the knob ...

thats odd ...
you could experiment with pots in the way I pointed
for the 20 volt and for the 9 Volt
but from now on you might better have a service manual .
and/or a plan of the circuit

are you shure "drum trigger" is not a piezo trigger input ?

just edited a little bit so we meet here ... there is a stereo pot with the same values 2 x 50 KiloOhm avaiable as a sparepart for FC 9 (from Yamaha).... could solve your prob ... maybe show my post to the tech , he will know what to do :wink: Also, I read that the filter input does take 20volts ...

first : I am not responsible for any damage to your "Dinosaur" (there IS danger of damaging it ) do you know of a pedal that did work in the past ? how many cables are connected to the DIN inside MaxiK , 2 or 3 ? do you have a repair manual ? now I understand this : 20 Volts (!) out from the DIN ...

First I had to google , what a MaxiKorg is . So obviously I dont have one , :wink: but I did modify a FC7 and a FC9 both use a potentiometer that ranges from 50 k Ohm (heel position) down to zero Ohm (toe position) .. Linear resistance curve (not audio taper) . dont wanna write a (useless ...

Hello Midisaron , Thats some good news from Planet MIDI , HELLO... :D 8) So you now can separate the rimsignal from the head signal and even control the behaviour of the conversion to MIDI signals ? You have 2 MIDI note on and CC Controller Data in the full range ? ( MIDI OUT only , of course ...

Percussion is played on the pickguard of a guitar. Piezo signal into an FX chain . <iframe width="420" height="315" src="http://www.youtube.com/embed/_zwbf6Uxm2M" frameborder="0"></iframe> or maybe "African style" ? <iframe width="420" height="315" src="http://www.youtube.com/embed/gJMAbHrvQsc ...