Korg Forums

Add to set list should solve 1) =)

I don't know for the rest ^^

You can push Drum Track button and choose a groove in Basic / Drum Track and check the list. If you don't have what you need, you import some midi grooves taken on the web and convert them into user drum tracks =) Metronome : press enter + rec, choose Ok and you'll go in sequencer mode with a ...

I did have an issue that I've mentionned to Korg : two tracks in the DAW, one on channel 1 and one to ch10 to record both tracks at once. The DT does not send any midi data : to correct this, I must go in Global Midi, uncheck and recheck Prog Midi Out and it works.

Hope this helps =)

You should precise what you want to do. As far as I know, i've plugged my guitar into my kronos and no problem at all, everything is correct. I've also recorded some songs with sounds inside the kronos and just tuning the EQs and other things only on the kronos and recorded it Reaper DAW, for ...

I didn't see any AMS pads assignation available =)

Normal, it wil use a new song for each new program set to record.

Do it with a first program, record things, stop and go on top left button and select copy from program, choose the new one with drum track and set it to another track. Don't forget the ifxs if needed =)

Use an AMS with a LFO to it, and get it midi synced, you'll have a button

I was completly lost with my K, even I had a X3 in early years... But with persistence and a lot of video tuts, I can ride my K on all sides =)

CyA and continue, this will take a time but not so long =)

I did a superposition of two EXis, a German and a Japanese, you might notice that they're not tuned the same way when you hit keys in the last octave, same thing in the lower one, sounds fun sometimes =)

It's a flight case =)

Go ahead, it's a good device =)

With the FCB in Midi mode, you can control the banks you assigned, so ABCD to 1234. You can switch the banks on and off as you wish, all off, all on, only one if you want... But not simulaneaously, if you want to switch off BC or AD or AC or else, you must press each FW one after one. My wiring does ...

If you want to activate B and mute C with Midi, that does not work simultaneaously, one per one... The buttons remains activated or not if you press another one of course =) With this wiring, you can switch the four on/off at the same time if you want ^^ Don't forget it's stand alone, you can ...

I don't understand, you want to make the BPM clock to internal ?

If so, hold shift and press the 4 button (midi filter) CLOC will be displayed, push on the Program knob (the upper right one) and turn it to get Int =)

CyA

Thanks for the answers, I didn't see it... =)

For your first answer, do I access it within bcrmanager or on the bcr itself ? I can't figure out which knob mode I must have to put the res default and minmax values...