KP3 Touchpad Is Stuck
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
philadesigns
- Posts: 2
- Joined: Sat Nov 22, 2008 10:32 pm
KP3 Touchpad Is Stuck
Well, I've had my KP3 for about 7 months now and have had no problems at all. But today while using it, 2 of the points on the touchpad are now permanently lit! This really makes the KP3 completely unusable. I've tried turning the KP3 on and off etc., but the 2 points remain lit. Has anyone ever had this problem or know how to fix it?
-
philadesigns
- Posts: 2
- Joined: Sat Nov 22, 2008 10:32 pm
calibration...
well, i found out how to calibrate the KP3 by starting up the machine while holding down 7, 8, and SAMPLING. this brought up the calibration procedure. but after press the CAL.1 section, it jumped to CAL.2 and wouldn't let me calibrate CAL.2...it then landed on CAL.3....so, i can't even calibrate it!....any suggestions?
-
salamanderanagram
- Senior Member
- Posts: 422
- Joined: Sun Jul 27, 2008 4:29 am