kaossilator pro out of tune
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
signal2noise
- Posts: 16
- Joined: Fri Aug 27, 2010 4:26 pm
- Location: the zone
kaossilator pro out of tune
my kopro just decided to go 1/2 step out of tune. i can hear it and i checked it with several tuners. happens on all patches regardless of scale/range settings. it's not a subtle 'kaoss' kind of out-of-tune; the base pitch for each scale, which had always been rock-solid, is now consistently a half step down. i've power cycled, reloaded the program data using the Editor, and reinstalled the OS (1.02). anyone had this problem or know of a deeper system/novram reset procedure? if controlling it from a midi keyboard wasn't such a pain in the a** i could at least troubleshoot a bit further and see how it behaves when played from an external controller. ugh..
-
signal2noise
- Posts: 16
- Joined: Fri Aug 27, 2010 4:26 pm
- Location: the zone
kopro tuning issue
it doesn't matter what the key/range settings are. if i set it to A major (or A anything) the first note is Ab. if I set it to Gm Pentatonic the first note is F#. and so on. it is consistently 1/2 step out of tune. i use my kopro in a number of live situations where i have to play to charts and am used to setting up my patches in different keys; regardless of scale settings, effects, crazy harmonics etc the base pitch has always been spot-on.
hmmmm....are you sure there is nothing stuck anywhere on the edge of the pad? that would make it play a note between that point and your finger...so if something is wedged like under the yellow border plastic, maybe it is registering a note off the scale one whole step, then the average between that point and your finger would be one half step too low....maybe?
-
signal2noise
- Posts: 16
- Joined: Fri Aug 27, 2010 4:26 pm
- Location: the zone
-
signal2noise
- Posts: 16
- Joined: Fri Aug 27, 2010 4:26 pm
- Location: the zone
yeah, i have not tried the calibration procedure yet. i will do a search on the forum later; i know it's here somewhere. i'm skeptical that it will have any effect as i think it has more to do with what happens between (say) the first cell on the bottom left and the last cell on the top right. i remember doing the calibration procedure when i first got the KoPro and regardless the bottom left cell was always the root note of the currently selected scale. but i could be wrong, i did this a year ago in a 3AM panic because something else wasn't working right
-
signal2noise
- Posts: 16
- Joined: Fri Aug 27, 2010 4:26 pm
- Location: the zone