My KP3 is misbehaving: when I turn it on, the uppermost left touchpad pixel remains highlighted, and the lights don't follow my finger correctly (the FX, too, seems to not be tracking my finger).
But—here's the twist: if I turn it off for a day or so and restart it, it works fine for about a little bit before going back to being all jacked up. So it's obviously capable of working. I've calibrated the touchscreen (which is only possible when it's been off overnight), and I'm OS 2.0.
Anybody got any ideas? Thanks.
KP3 odd behavior
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
oysteinmoen
- Posts: 3
- Joined: Fri Apr 04, 2014 2:13 pm
Hi there. This seems to be the problem with my KP3 as well, please take a look at this video.
https://dl.dropboxusercontent.com/u/290 ... G_3284.MOV
Anyone know how if this is fixable? And how do you recalibrate the x/y-pad?
https://dl.dropboxusercontent.com/u/290 ... G_3284.MOV
Anyone know how if this is fixable? And how do you recalibrate the x/y-pad?
-
neotechtonics
- Platinum Member
- Posts: 513
- Joined: Thu Jul 01, 2010 8:03 am
- Location: Durban, South Africa
similar thing has happened to mine also.
There is a pad recalibration method but is completely pointless because you have to touch each corner of the pad and if the pad isnt following your touch you cannot touch the other corners.. thanks Korg!
I took my KP3 entirely apart and reassembled it making sure that the pad's ribbon cable was firmly attached that seemed to fix the problem temporarily but I've given up on my KP3 because I cannot take the risk of it bugging out when I am using it and need it.
A stuck pad could also be a dent in the protective pad screen.. or dirt inside the pad assembly.
I don't recommend taking it apart unless you've worked on other electronics before and take the utmost care.
I'll pull her out of storage again in future to see if she wants to behave again.
There is a pad recalibration method but is completely pointless because you have to touch each corner of the pad and if the pad isnt following your touch you cannot touch the other corners.. thanks Korg!
I took my KP3 entirely apart and reassembled it making sure that the pad's ribbon cable was firmly attached that seemed to fix the problem temporarily but I've given up on my KP3 because I cannot take the risk of it bugging out when I am using it and need it.
A stuck pad could also be a dent in the protective pad screen.. or dirt inside the pad assembly.
I don't recommend taking it apart unless you've worked on other electronics before and take the utmost care.
I'll pull her out of storage again in future to see if she wants to behave again.
http://soundcloud.com/neotechtonics
KORG GEAR: EMX1-SM -- EMX1-SD -- KAOSS PAD3 -- MICROKORG -- KAOSSILATOR PRO -- NANOKONTROL1
OTHER GEAR: Roland SP404, MC303 -- Akai MPC-2500 SE -- Zoom R16 -- effects pedals -- DJ-gear -- Access Virus B
KORG GEAR: EMX1-SM -- EMX1-SD -- KAOSS PAD3 -- MICROKORG -- KAOSSILATOR PRO -- NANOKONTROL1
OTHER GEAR: Roland SP404, MC303 -- Akai MPC-2500 SE -- Zoom R16 -- effects pedals -- DJ-gear -- Access Virus B
-
oysteinmoen
- Posts: 3
- Joined: Fri Apr 04, 2014 2:13 pm
ok
I actually made it. I took it apart, every single piece inside it, and blew all possible dust off with a compressed air blower. I noticed at the actual touch screen, in the very side of the glass (but unreachable from the outside) was a tiny piece of rubbish that probably made the problem.
But you are right, use caution when disassembling the unit, a bit fragile inside there.
Oystein
I actually made it. I took it apart, every single piece inside it, and blew all possible dust off with a compressed air blower. I noticed at the actual touch screen, in the very side of the glass (but unreachable from the outside) was a tiny piece of rubbish that probably made the problem.
But you are right, use caution when disassembling the unit, a bit fragile inside there.
Oystein
-
oysteinmoen
- Posts: 3
- Joined: Fri Apr 04, 2014 2:13 pm
