Korg Forums

Normally, each preset comi doesn't use all 16 timber. For example, the preset combi 89 'proncess hannah's piano ' uses only 1-8 track and rest of tracks are inactivated.
I want to add several timbers on track 10, and i assigned violin there, i couldn't hear any sound even if i set it solo. And i checked midi filter and keybord velocity zone, everything was pretty fine as other activated tracks. Is my kronos malfunctioning? Please help. I cannot continuey recording due to this problem. Thanks.

Each Timber has a MIDI channel assigned and typically they are set in order. However, to play from the keyboard the MIDI channel needs to be changed to the Global channel.
For example, timber 9 is likely set to MIDI channel 9. Change that to MIDI channel 1 (which is usually the global channel) and make sure the key range is set appropriately.

Geo

Check the "Track Status" parameter. It is likely set to OFF. Set it to "INT".

You have to check what they have answered, that should generally solve the problem.

Another thing that you can try, is to add the program with the option Copy from Program (it loads directly all the parameters of the sound and the midi channel). You place on the channel you want to add, open the menu options at the top right, choose Copy from Program, and select what you want to bring (only sound, ifx, mfx).

I hope you solve it! Greetings.

Thank you guys! I solved the problem !