Adding KARMA pattern to existing track in sequencer. works?

[kimu]

Hi all,

i am recording on internal sequencer some trial for a new song to play with my band and found out the following:

on track 1 (MIDI channel 1) i "copy from program" the D-029 Mass Destruction with its own IFX,MFX,TFX and drum tracks (on track 10, MIDI channel 10) but no the Karma.

then i recorded some chord progressions togheter with drum and no karma module in use.

now i'd like to try to add on recorded track some KARMA pattern, remain inside sequncer i do:

push "page select" button
enter "karma1 GE setup" page (P7-1)
assign to module A the desider KARMA pattern and select RUN
and for module A set IN to tch1 and OUT to Tch1 (so i hope to apply it so my track 1 assigned to MIDI channel 1)

then if I play new chord using trackv1, KARMA is applied, but if I playback the recorded chords, no KARMA is applied.

this means that is not true something like:

playback tracks on MIDI channel 1 > enter KARMA > KARMA effect applied on output MIDI channel 1 > sound to amplifier?

this means KARMA commands shall be recorded togheter with chord?
and if so, if i want to change KARMA effect i have to re-record everything?
if so, it seem a little bug to me...

can anyone explain? thanks.

[Arend Groot]

this means KARMA commands shall be recorded togheter with chord?
thanks.

Yes, you can't adding KARMA after you have recorded a track in the internal sequencer. Too bad. You can do it with a external sequencer.

You have to record the track together with KARMA on in the internal sequencer.

This one is on my wishlist

Arend

[kimu]

it is on my wishlist too!!!! korg&mr. kay do it!!