Hello, i own a korg kaoss pad KP3 , and i always have problem with getting the samples from the computer in to the machine.
Can i just make samples and editing in the "KP3 editor" and save in in a sd-card, put the card in the KP3 and open it?
or what is the eazyest way of making it.
i think the manual is pretty hard cause my english isn´t perfect.
pleeeese help a lost man.
Get the samples in to the machine. KP3 Kaoss pad
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
bananaramaman
- Posts: 1
- Joined: Tue Sep 01, 2009 12:11 pm
-
scpmadbeatz
- Posts: 5
- Joined: Sat Sep 12, 2009 7:47 pm
hey bro
listen up
this is what u should do but first update u r firmware to the newest
and i m having a problem with the sd card what brand , type and capacity ? are u using .. help me out as well ..lol
Peac...
1 - turn off your kp3. unplug usb cable
2 - at windows start / programs / korg / KORG USB-MIDI Driver Tools
run the "Install KORG USB-MIDI Device"
3 - turn on your kp3.
4 - connect the usb cable.
5 - start the kp3 editor (windows start / programs / korg / kp3 / korg editor )
6 - at midi menu choose "preferences"
7 - at Midi-IN port choose "KP3 PAD", at Mid
8 - at Midi-OOT port choose "KP3 1 SOUND"
this is what u should do but first update u r firmware to the newest
and i m having a problem with the sd card what brand , type and capacity ? are u using .. help me out as well ..lol
Peac...
1 - turn off your kp3. unplug usb cable
2 - at windows start / programs / korg / KORG USB-MIDI Driver Tools
run the "Install KORG USB-MIDI Device"
3 - turn on your kp3.
4 - connect the usb cable.
5 - start the kp3 editor (windows start / programs / korg / kp3 / korg editor )
6 - at midi menu choose "preferences"
7 - at Midi-IN port choose "KP3 PAD", at Mid
8 - at Midi-OOT port choose "KP3 1 SOUND"