getting mad can't mute sweep synth... haunted track !!!!!!

Discussions relating to the Korg Pa2X Pro, Pa800 & Pa500

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
paulmpianist
Full Member
Posts: 111
Joined: Fri Jul 27, 2007 3:31 am
Location: Maryland/ Virginia
Contact:

getting mad can't mute sweep synth... haunted track !!!!!!

Post by paulmpianist »

I cannot get this sweep sound out of this style. I'm about to try it under water. really ticking me off....

http://www.youtube.com/watch?v=pWLn-mr8Sbw


I tried muting it, tried replacing it. Replacing it AND muting it.... did anybody have this happen? I think its only this style so far.
I'm not a loner. I'm a soloist.

http://www.youtube.com/watch?v=BEPBsmmKXG8
User avatar
LESSISMORE
Platinum Member
Posts: 531
Joined: Wed Jul 15, 2009 8:37 pm
Location: Germany

Post by LESSISMORE »

Hi

it may be, that DRY (mixing console) is unchecked.
Please check DRY for the track and try to change the sound.
Best regards from germany

LiM
Image
The Good The Bad And The Ugly
paulmpianist
Full Member
Posts: 111
Joined: Fri Jul 27, 2007 3:31 am
Location: Maryland/ Virginia
Contact:

Post by paulmpianist »

Danke schoen nach einmal!!! I think I got it. One thing confusing for me is switching from the PA80 you had a whole page of accompaniment tracks and the other page was the tracks you play. On the PA500 I guess its the same but the layout isn't as clear. It seems like there are less tracks to play around with.
thanks I got control of that sweep though. I have to admit that during the process the sweep got REALLY dominating and ...oops there was a synth DXi
in one of the Sonar Tracks.
thanks a lot
paul
I'm not a loner. I'm a soloist.

http://www.youtube.com/watch?v=BEPBsmmKXG8
User avatar
LESSISMORE
Platinum Member
Posts: 531
Joined: Wed Jul 15, 2009 8:37 pm
Location: Germany

Post by LESSISMORE »

Hi Paul

Use the Trc-Sel. Button to see all tracks.
Best regards from germany

LiM
Image
The Good The Bad And The Ugly
Post Reply

Return to “Korg Pa2XPro - Pa800 - Pa500”