Korg Forums

Hi,

Im a beatboxer and use three KP3's going through a Behringher XENYX 1204 USB mixer. At the moment, I am going in and out of the mic inputs in each kaoss pad individually, which is obviously very awkward. Is there some way I can hook it up through the mixer without having to do this? I have tried to split the connection with adapters and phono leads with the mic as an AUX send to each channel, but the connection was weaker in some of the kaoss pads. Could anyone shed any light on this?

Cheers,

Sikth11

Do you have an idea of how you want to send your voice through them?

Can you describe or diagram the path that your music will take from the mic to the speakers?

I have the three channels with the kaoss pads in the mixer, then have a channel for the mic which is being used as an AUX send to all the other channels. So the mic channel is running to the 3 channels with the kaoss pads. I tried then to split the connection through the line in's at the back of the kaoss pads. To do this i needed to go from line in to line in on the kaoss pads which meant i needed adapters to run the connection along, as there is no room to pass the connection through from phono to phono. This resulted in the output of the kaoss pads being weaker as the connection went down the line. Have you any alternative methods that you would know? Or maybe a way of getting this method to work? Cuz i dont!! haha

Cheers,

Sikth11