Korg Forums

Hi,

Question about audio inputs and the effects.
I use to plug the output of the V-Synth into the audio input 1 of the Kronos.
In global (kronos) I set up the audio input 1 on the L/R but of course depending on the programs or combis I choose on the Kronos the Total Effect will affect also the signal coming from the V-Synth.

Is there any way to route the input audio into the L/R without effects or I'm forced to route on other outputs?

Even if you don't need to record into the Kronos sequencer, You can use it to route any input you want with or without effects. Very simple

I don't need to record, I need to route the signal of the V-Synth into the L/R output of the Kronos, but without applying any effect.

I tried and unfortunately id doesn't work because the Kronos applies the TFX of the selected program/combi to the signal coming from the V-Synth into the input.
I need that the signal goes straight and flat from the Audio Input 1 to the L/R output.

From the Global menu you can choose to route the signal to L/R, other outputs or to one of the 12 Insert effects...I selected L/R but the total effect is still applied to the signal.

I use my inputs as an effects return so I too don't want individual programs/combi's adding or changing the effects.

In global, under the Audio tab, look to the right of the screen for Audio Output LR bus, Inv assign... set to off. This may fix it for you.

Geo

Will try, thanks for that and sorry for my entrylevel questions, got my kronos few days ago

Update: I checked that the option Audio Output LR bus was off (it already was), I routed my audio input (the V-Synth but I also tried to plug a korg trinity and a mic) and when I change programs or combis the effects are applied to the signal.

Yes, the TFX is applied to the total mix.

You can either turn off TFX, or route the input to individual output 3.4, then use y cables to merge your Main LR outputs with individual 3,4 outuputs from KRONOS.