Page 1 of 1
voice processor lead mute
Posted: Sat Aug 24, 2013 6:32 am
by dazza777
Hi,
I have a PA3x and I can't seem to turn the lead vocals off. I want to record just the harmonies on mp3 to make a backing vocals track but I can't turn off the lead vocal. I have tried the lead mute button and adjusted other settings as listed in the manual but none have any effect. I have only had the pa3x for a few weeks and hadn't tried this function before this.
Can anyone advise on this?
Re: voice processor lead mute
Posted: Sat Aug 24, 2013 7:45 am
by Beemer
dazza777 wrote:Hi,
I have a PA3x and I can't seem to turn the lead vocals off. I want to record just the harmonies on mp3 to make a backing vocals track but I can't turn off the lead vocal. I have tried the lead mute button and adjusted other settings as listed in the manual but none have any effect. I have only had the pa3x for a few weeks and hadn't tried this function before this.
Can anyone advise on this?
If the voice is not in the center of the stereo (MP3?) mix and also if it has vocal processing applied then you will not be able to remove the voice.
This applies whether or not you are using a PA3x.
Ian
Posted: Sat Aug 24, 2013 10:30 am
by karmathanever
I think I have done this but will have to check (could be having a senior moment again...)
Pete

Posted: Sat Aug 24, 2013 10:50 am
by dazza777
Thanks Beemer,
Unfortunately it's still not working for me and the pan and level for the lead voice has no effect on the volume of the lead voice either.
Posted: Sat Aug 24, 2013 11:17 am
by dazza777
Hi Pete and Beemer,
I loaded os v1.00 and it still didn't work. Then I loaded V 1.00 resources and now the lead mute works to my surprise. I guess some files were corrupt. I'm now going to update back to v 1.62 and hope it still works.
Thanks
Lead mute
Posted: Sat Aug 24, 2013 4:53 pm
by ronker
Hi,
I don't know exactly what your trying to do but if it is trying to record an mp3
While playing a style or midi and just have the harmonies come through,
I have mic + harmony buttons on, then go into global menu ,vocal processor
Preset, tab along to mixer fx and in reverb adjust turn lead to rev off
Then touch harmony tab and in bottom right turn lead level off, this stops lead and lead rev entering harmonies,
You can then top right drop down menu write this global preset.
Hope this helps
Posted: Mon Aug 26, 2013 11:08 am
by dazza777
Thanks Ronker!
Your advice works perfectly and I've learnt something new.