KORG WAVESTATION (NEW USER)

Discussion relating to all other KORG synth related products that don’t have a dedicated section. For example, OASYS PCI, M1, N Series, 01W series, T series, and more…

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
BROCKDAVISSON
Posts: 6
Joined: Wed Nov 20, 2013 1:01 pm
Location: United States

KORG WAVESTATION (NEW USER)

Post by BROCKDAVISSON »

Hello guys and girls. I just recently got a hold of a Korg Wavestation from a friend for $75 version 2.28 8/15/1990, which I think is a great deal. Checked it over a bit and all is good to go. The screen is a bit dimmer then it probably used to be, but not to worried about that right now. I opened her up and replaced the battery with a new CR2032 lithium battery, so that's all good. All controls and stuff works fine! :] I have been for the past few days since I've gotten her, searching the internet world for new patches in sysex format for her. I'm using a program called Bome's SendSX 1.30 which is a great program. Hooked her up with a midi to usb into laptop and sends patches just fine :]

So far I've got a list of nice patches for her, the usual ben hall type and others... my question is, can anyone direct me to more places to find more for it? also can M1 sysex patches be used as well? Or any sysex patches from other synths? Can you use the virtual wavestation .syx files in the hardware wavestation?

Also, sometimes when I load a dump in it, i'll get a metal, distorted aweful noise... I am assuming the program is missing some waves or something and was meant for some other version of WS1?

Also other times I'll load a patch in and a few presets won't play?

Thanks for any help :]
Korg Wavestation WS1 - Akai Miniak - Waldorf Blofeld - Roland GR-30
BROCKDAVISSON
Posts: 6
Joined: Wed Nov 20, 2013 1:01 pm
Location: United States

Post by BROCKDAVISSON »

Oh yeah and sometimes when I'm playing it'll just stop and flash Korg wavestation, and then once i load a new bank into it and turn it off/on it's back up and running and sometimes it doesn't :\ HELP?
Korg Wavestation WS1 - Akai Miniak - Waldorf Blofeld - Roland GR-30
BROCKDAVISSON
Posts: 6
Joined: Wed Nov 20, 2013 1:01 pm
Location: United States

Post by BROCKDAVISSON »

I read that if it happens, take back off, remove battery for 5 to 10 mins and put it back in and it'll reboot the system.... I guess it works for others, so I'll try that. I guess it crashes off and on after extensive sysex loading......
Korg Wavestation WS1 - Akai Miniak - Waldorf Blofeld - Roland GR-30
BROCKDAVISSON
Posts: 6
Joined: Wed Nov 20, 2013 1:01 pm
Location: United States

Post by BROCKDAVISSON »

Well that fixed it, taking battery out and letting it sit a little.... and damn this forum is so dead. No one seems to help :\
Korg Wavestation WS1 - Akai Miniak - Waldorf Blofeld - Roland GR-30
User avatar
Synthoid
Platinum Member
Posts: 3300
Joined: Mon Mar 17, 2003 12:54 am
Location: PA, USA

Post by Synthoid »

Glad to hear it's OK.

Apparently not many Wavestation users here... 8)
M3, Triton Classic, Radias, Motif XS, Alesis Ion
BROCKDAVISSON
Posts: 6
Joined: Wed Nov 20, 2013 1:01 pm
Location: United States

Post by BROCKDAVISSON »

I went through the tons of pages here and there's actually quite a bit of threads started on the wavestation lol.... but yeah it's all good for now, but would be nice if someone answered and helped me in my original questions/thoughts in my original post :]
Korg Wavestation WS1 - Akai Miniak - Waldorf Blofeld - Roland GR-30
jorgemncardoso
Full Member
Posts: 237
Joined: Tue Aug 19, 2008 7:13 pm

Re: KORG WAVESTATION (NEW USER)

Post by jorgemncardoso »

BROCKDAVISSON wrote:Hello guys and girls. I just recently got a hold of a Korg Wavestation from a friend for $75 version 2.28 8/15/1990, which I think is a great deal. Checked it over a bit and all is good to go. The screen is a bit dimmer then it probably used to be, but not to worried about that right now. I opened her up and replaced the battery with a new CR2032 lithium battery, so that's all good. All controls and stuff works fine! :] I have been for the past few days since I've gotten her, searching the internet world for new patches in sysex format for her. I'm using a program called Bome's SendSX 1.30 which is a great program. Hooked her up with a midi to usb into laptop and sends patches just fine :]

So far I've got a list of nice patches for her, the usual ben hall type and others... my question is, can anyone direct me to more places to find more for it? also can M1 sysex patches be used as well? Or any sysex patches from other synths? Can you use the virtual wavestation .syx files in the hardware wavestation?

Also, sometimes when I load a dump in it, i'll get a metal, distorted aweful noise... I am assuming the program is missing some waves or something and was meant for some other version of WS1?

Also other times I'll load a patch in and a few presets won't play?

Thanks for any help :]
Hi BROCKDAVISSON, welcome to the forum and congrats on your wavestation purchase
Mate, $75? That's one hell of a great buy :D I wish i could find a keyboard version for that price. Well i've already got a T3ex for 100€ so realy great deals does not come often LOL

Ok, so since everything from controllers to the keys on your wavestation is fine and in good shape like you posted, let's talk about patches:

I have just about every patch ever made for the Wavestation (they are many!) so if you send me your e-mail i can send you all the patches to keep you busy till next year :lol: All patches in .syx format.

Regarding, your question :"also can M1 sysex patches be used as well? Or any sysex patches from other synths?"
-No it can't, the Wavestation can only read syx files created on the Wavestation, it won't read other synths formats.

The hardware Wavestation can read only the syx formats, it can't read the software version format (fxb, wsram, etc...). However the software version can load the syx formats.

Does your WS have the EX expansion installed or is it just the original version (mk1) model?
If is the first version when you load some files some patches won't sound because they are patches that use the extra samples present on the EX version (or on the SR for that matter).

When you get distorted patches is probably errors on the syx transmission, try the program MidiOx for sending patches, is one of the best, and reduce the speed of transmission a bit on the program. You see, modern computers are too fast sometimes for older synths to catch up, you have to send files more slowly.

Hope that helps, and let me know if you want the files

Cheers :)
________________________________________
Keyboard Gear:
Korg: Trinity, 01/Wfd (2X), T3 ex, Wavestation SR
Yamaha: Motif XS8
Roland: expanded JV-1010 modules (3X)
...And a bucket load of Softsynths, plug-ins, and DAW's :-)
kenackr
Platinum Member
Posts: 521
Joined: Tue Nov 20, 2007 9:52 pm
Location: Corpus Christi Metro Area

Post by kenackr »

Brock,

You may never comeback to the forum based on your initial post results, but if you do, you should know that just removing & reseating the battery will not last very long. The little batteries all die after awhile but they are quite cheap to replace.

If you still have the synth, go ahead and replace the battery to avoid it dying at an inopportune time.
O88, T1, Wavestation, M1r, Pa 4X 76, Proteus 1-3, Morpheus, UltraProteus, K1200, Akai S2000, DP8
Post Reply

Return to “Korg Synths (General)”