Page 1 of 1
Kaossilator II Problem at 2nd day
Posted: Mon Jan 06, 2014 11:18 am
by treppenwitz
Two days ago i bought this device, everything was ok.
But now when i'm trying to turn it on i see only the right light.
Is there any "restore to default" secret key?
Sorry for my english.
Thnx.
Posted: Mon Jan 06, 2014 12:05 pm
by Niarf
http://www.korgforums.com/forum/phpBB2/ ... f6438791e8
Power on with Fnc button pushed will try ? (last reply)
Posted: Mon Jan 06, 2014 12:38 pm
by treppenwitz
It's helped only one time. Now it's all the same.
Mabye KO2 have got little battery inside (like a PCs with their motherboadrs)?
Posted: Mon Jan 06, 2014 1:36 pm
by Bald Eagle
Try new batteries. They don't last very long.
Posted: Mon Jan 06, 2014 2:33 pm
by treppenwitz
Bald Eagle wrote:Try new batteries. They don't last very long.
i've been charging them for all night, that's shoud be enought for power-on at least
Maybe today i'll get managed to find adapter.
Posted: Thu Jan 09, 2014 3:18 pm
by treppenwitz
Well, latests news: adapter was bought, but there are no changes noticed.
This f*cking device keeps silence.
Posted: Thu Jan 09, 2014 9:25 pm
by Bald Eagle
The first KO2 I had lasted about a month before I had a power problem. No lights came on with mine, it was completely dead. I returned it for a replacement. I never found the cause of the problem.
Posted: Fri Jan 17, 2014 4:30 pm
by treppenwitz
Well, today i unpacked the body of KO2. Disease was found!
All troubles were aroused by the power cable between two halfs of the device.
This cable is kinked and don't provide due connection.
That's why i would like to ask you, guys, if you have got the 10 pin power cable?
Thanx a lot.
Posted: Sun Jul 27, 2014 1:29 pm
by rzr
can you share some pictures ?
Posted: Thu Aug 14, 2014 12:39 am
by jiggityj
The mic switch on my MiniKP2 broke because the solder that holds the switch in place broke off. It actually ripped out of the PCB board, making it impossible to solder back. It happened 2 weeks after I bought it, so bad QC from korg.
That can be the culprit, as the power switch is the same type of switch. My KO2 is still perfect though.